Uma pequena reinicialização. Muito mais impressão. Diretamente do Wic Reset Connect equipe
Restore Epson EP-707A in Minutes – Waste Ink Counter Reset Tutorial

Restore Epson EP-707A in Minutes – Waste Ink Counter Reset Tutorial

Your Epson EP-707A may halt with Erro E11 ou Serviço necessário when the contador de tinta residual is full. Clear it using WicReset Connect in about 2 minutes. Keys start at 6 euros. Windows 7–11 (USB).

Common Symptoms – Epson EP-707A

  • A impressora não imprime, e os LEDs estão piscando.
  • Programas Erro E11 ou Serviço necessário.
  • Exibe o seguinte aviso: A almofada de tinta precisa de manutenção.

Why Epson EP-707A stops

Epson EP-707A enforces a stop once the internal contador de tinta residual gets too high. Clear the counter and the warning typically disappears; pad replacement is not always required.

Quick facts – Epson EP-707A reset

ModeloErroSoluçãoSOTempo de reinicialização
Epson EP-707AErro E11 / Almofada de tinta precisa de manutençãoWicReset ConnectWindows 7–11 (somente USB)~2 minutos

Download reset tool & driver

No verified official Epson driver found for Epson EP-707A. Please refer to Navegador de configuração da Epson para softwares compatíveis.

Tutorial em vídeo

▶ Assista ao tutorial do WicReset

Disponível em vários idiomas, com narração.

Reset steps for Epson EP-707A

  1. Connect Epson EP-707A to your PC via USB cable.
  2. Lançamento WicReset Connect e certifique-se de que a impressora seja reconhecida.
  3. Compre um tecla de reinicialização, digite e clique em Redefinir.
  4. Aguarde cerca de 2 minutos e, em seguida, desligue e ligue a impressora novamente.

FAQ – Epson EP-707A

Can I reset at 100% lock?

Yes — but many users reset proactively at ~95% to avoid downtime.

Will I see the counter after reset?

Yes — it should read 0% (or close) after successful reset.

Do I need to power-cycle?

Yes — turn the printer off/on after the reset completes.

Can I keep printing large jobs after reset?

Yes — monitor the counter and maintain the device as usual.

Any risks to cartridges?

No — cartridges/ink system aren’t altered by the reset.

Tips for Epson EP-707A reset

  • Reinicie por volta de ~95% para evitar o bloqueio total.
  • Reduza as limpezas desnecessárias do cabeçote.
  • Use um cabo USB curto e de alta qualidade para garantir a estabilidade.

This page is dedicated to Epson EP-707A reset instructions using WicReset Connect.

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • Cabo USB

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.


Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” ou “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.

Deixe um comentário

×

Carrinho