Get Epson NX510 Working Again – Reset Waste Ink (E11/Service Required)
Your Epson NX510 may show A almofada de tinta precisa de manutenção when the contador de tinta residual is high. Reset it in ~2 minutes via WicReset Connect. Chaves de 6 euros. USB + Windows 7–11.
When Epson NX510 Needs Reset – Symptoms
- A impressora não imprime, e os LEDs estão piscando.
- Programas Erro E11 ou Serviço necessário.
- Exibe o seguinte aviso: A almofada de tinta precisa de manutenção.
Why Epson NX510 stops
When the contador de tinta residual maxes out, Epson NX510 shows Service required. Counter reset re-enables printing; pads might not be fully saturated yet.
Quick facts – Epson NX510 reset
| Modelo | Erro | Solução | SO | Tempo de reinicialização |
|---|---|---|---|---|
| Epson NX510 | Erro E11 / Almofada de tinta precisa de manutenção | WicReset Connect | Windows 7–11 (somente USB) | ~2 minutos |
Download reset tool & driver
No verified official Epson driver found for Epson NX510. Please refer to Navegador de configuração da Epson para softwares compatíveis.
Tutorial em vídeo
▶ Assista ao tutorial do WicReset
Disponível em vários idiomas, com narração.
Reset steps for Epson NX510
- Connect Epson NX510 to your PC via USB cable.
- Lançamento WicReset Connect e certifique-se de que a impressora seja reconhecida.
- Compre um tecla de reinicialização, digite e clique em Redefinir.
- Aguarde cerca de 2 minutos e, em seguida, desligue e ligue a impressora novamente.
FAQ – Epson NX510
Why blocked if pads aren’t full?
The counter is an estimate; it can lock before physical saturation.
Does resetting change ink levels?
No — it affects only the waste ink counter.
Can I reset over a USB hub?
Use a direct, high-quality USB cable for best stability.
Will I lose settings?
No — network/print settings remain.
Can I print immediately after reset?
Yes — power-cycle the printer and it’s ready.
Tips for Epson NX510 reset
- Reinicie por volta de ~95% para evitar o bloqueio total.
- Reduza as limpezas desnecessárias do cabeçote.
- Use um cabo USB curto e de alta qualidade para garantir a estabilidade.
This page is dedicated to Epson NX510 reset instructions using WicReset Connect.
Fix “The Ink Pad Needs Service” Error – Supported Epson Models
What you need
- WicReset Connect key (only about €6 – the cheapest option)
- Windows PC
- Cabo USB
Time required
About 2 minutes
Difficulty
Very easy
Works for errors
- Epson: E10, E11, E12, E91 and similar service errors
- Canon: 1700, 5800 and similar waste ink / support code errors
- Messages like “Waste ink counter full”, “Ink pad at the end of its service life”
Supported printer series
Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.
Reset Epson ink pad service
If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” ou “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.
- Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
- Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
- No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.
FAQ (short)
Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.
Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.