Uma pequena reinicialização. Muito mais impressão. Diretamente do Wic Reset Connect equipe
Epson XP-2151 USB Reset – Clear Ink Pad Counter & Remove E11

Epson XP-2151 USB Reset – Clear Ink Pad Counter & Remove E11

Your Epson XP-2151 may show A almofada de tinta precisa de manutenção when the contador de tinta residual is high. Reset it in ~2 minutes via WicReset Connect. Chaves de 6 euros. USB + Windows 7–11.

When Epson XP-2151 Needs Reset – Symptoms

  • A impressora não imprime, e os LEDs estão piscando.
  • Programas Erro E11 ou Serviço necessário.
  • Exibe o seguinte aviso: A almofada de tinta precisa de manutenção.

Why Epson XP-2151 stops

Your Epson XP-2151 uses a contador de tinta residual to estimate absorbed ink. After reaching a set value, it stops printing. Resetting the counter removes the lock; actual pads may still have capacity.

Quick facts – Epson XP-2151 reset

ModeloErroSoluçãoSOTempo de reinicialização
Epson XP-2151Erro E11 / Almofada de tinta precisa de manutençãoWicReset ConnectWindows 7–11 (somente USB)~2 minutos

Download reset tool & driver

No verified official Epson driver found for Epson XP-2151. Please refer to Navegador de configuração da Epson para softwares compatíveis.

Tutorial em vídeo

▶ Assista ao tutorial do WicReset

Disponível em vários idiomas, com narração.

Reset steps for Epson XP-2151

  1. Connect Epson XP-2151 to your PC via USB cable.
  2. Lançamento WicReset Connect e certifique-se de que a impressora seja reconhecida.
  3. Compre um tecla de reinicialização, digite e clique em Redefinir.
  4. Aguarde cerca de 2 minutos e, em seguida, desligue e ligue a impressora novamente.

FAQ – Epson XP-2151

What happens if I ignore Error E11?

The printer remains blocked and won’t print.

Does reset void warranty?

If still under official warranty, it may. Most users reset after warranty.

How do I know it’s time to reset?

When counter is ~95% or when E11/Service Required shows.

Does reset fix “Ink Pad at End of Service Life”?

✅ Yes — it’s another form of the same counter warning.

Is external waste tank required?

Not required, but heavy users sometimes add one to reduce pad load.

Tips for Epson XP-2151 reset

  • Reinicie por volta de ~95% para evitar o bloqueio total.
  • Reduza as limpezas desnecessárias do cabeçote.
  • Use um cabo USB curto e de alta qualidade para garantir a estabilidade.

This page is dedicated to Epson XP-2151 reset instructions using WicReset Connect.

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • Cabo USB

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.


Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” ou “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.

Deixe um comentário

×

Carrinho