O mică resetare. Mult mai multă imprimare. Direct de la Wic Reset Connect echipă
Quick Guide: Reset Epson L130 Ink Pad Counter (Fix E11)

Quick Guide: Reset Epson L130 Ink Pad Counter (Fix E11)

Epson L130 blocked with Eroare E11 / Serviciu necesar? It’s usually the contor de cerneală uzată. Clear it quickly via WicReset Connect. Reset keys from 6 EUR. USB on Windows 7–11 only.

Typical Signs on Epson L130

  • Imprimanta nu vrea să imprime, iar LED-urile clipesc.
  • Spectacole Eroare E11 sau Serviciu necesar.
  • Afișează următorul mesaj de avertizare: Tamponul de cerneală necesită întreținere.

Why Epson L130 stops

When the counter hits its cap, Epson L130 prevents printing. Clearing the contor de cerneală uzată generally fixes the problem without pad replacement.

Quick facts – Epson L130 reset

ModelEroareSoluțieSistem de operareTimp de resetare
Epson L130Eroare E11 / Tamponul de cerneală necesită întreținereWicReset ConnectWindows 7–11 (numai prin USB)~2 minute

Download reset tool & driver

No verified official Epson driver found for Epson L130. Please refer to Ghidul de configurare Epson pentru software compatibil.

Tutorial video

▶ Urmărește tutorialul WicReset

Disponibil în mai multe limbi, cu narare.

Reset steps for Epson L130

  1. Connect Epson L130 to your PC via USB cable.
  2. Lansare WicReset Connect și asigurați-vă că imprimanta este detectată.
  3. Cumpără un tasta de resetare, introduceți-l și faceți clic pe Resetare.
  4. Așteptați aproximativ 2 minute, apoi opriți și porniți din nou imprimanta.

FAQ – Epson L130

Can I reset at 100% lock?

Yes — but many users reset proactively at ~95% to avoid downtime.

Will I see the counter after reset?

Yes — it should read 0% (or close) after successful reset.

Do I need to power-cycle?

Yes — turn the printer off/on after the reset completes.

Can I keep printing large jobs after reset?

Yes — monitor the counter and maintain the device as usual.

Any risks to cartridges?

No — cartridges/ink system aren’t altered by the reset.

Tips for Epson L130 reset

  • Reset around ~95% to avoid full lock.
  • Reduce unnecessary head cleanings.
  • Use a short, high-quality USB cable for stability.

This page is dedicated to Epson L130 reset instructions using WicReset Connect.

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • Cablu USB

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.


Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” sau “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.

Lasă un răspuns

×

Cart