Malé vynulovanie. Oveľa viac tlače. Priamo z Wic Reset Connect tím
SK — Slovenčina
Košík
Ponuka
Získajte kľúč na obnovenie ↗
Získajte kľúč na obnovenie
Canon TS704a – Waste Ink Counter Reset

Canon TS704a waste ink counter reset – fix error 5B00, 1700 and 5B02

If your Canon TS704a stopped printing and displays 5B00 or “Ink Absorber Full”, you can restore it quickly. Reset the waste ink counter using WICReset Connect — no service visit required.

Kúpiť kľúč na resetovanie zariadení Canon (od 6 EUR) Video návody a stiahnutie
Zistiť podporované modely Canon
Stručný prehľad
  • Vstúpiť prevádzkový režim on Canon TS704a
  • Stiahnite si a nainštalujte WICReset Connect
  • Pripojte tlačiareň prostredníctvom USB
  • Obnovenie trvá približne 2 minúty
Povinný krok

How to Enter Service Mode on Canon TS704a

Postupujte presne podľa tohto postupu:

  1. Vypnite svoju tlačiareň Canon.
  2. Stlačte a podržte tlačidlo na tlačiarni Canon RESET tlačidlo.
  3. Stlačte a podržte tlačidlo na tlačiarni VÝKON tlačidlo (počkajte chvíľu, kým sa tlačiareň zapne).
  4. Uvoľnite tlačidlo RESET, ale tlačidlo POWER držte naďalej stlačené.
  5. Pri stlačenom tlačidle POWER stlačte a uvoľnite tlačidlo RESET 5-krát.
  6. Po piatom stlačení a uvoľnení tlačidla RESET počkajte chvíľu, než uvoľníte tlačidlo POWER.

Ak sa tlačiareň neprepne do servisného režimu, odpojte ju na 10–15 sekúnd zo zásuvky a postup zopakujte.

Ďalšie metódy nájdete tu:

Všetky príručky k servisnému režimu spoločnosti Canon

How to Reset Waste Ink Counter on Canon TS704a – Step-by-Step

Krok 1 – Stiahnite si WICReset Connect

Click the button below to download WICReset Connect for Canon printers:

Download WICReset Connect
Step 2 – Enter Service Mode & Connect via USB
  • Ensure Canon TS704a is in prevádzkový režim.
  • Connect to your PC using a USB cable.
  • Wi-Fi is not supported for resetting.
Step 3 – Open WICReset Connect
  • Open WICReset Connect as Administrator.
Step 4 – Enter Your Reset Key & Click RESET
  • Buy a reset key using the button below.
  • Enter the key in the program.
  • Click RESET to start the operation.
Buy Canon Reset Key

The reset takes about 2 minúty.

Step 5 – Restart Printer
  • Wait until the program confirms completion.
  • Turn the printer off for 10 seconds.
  • Turn it back on — errors should disappear.

Canon TS704a Error Codes Explained

  • 5B00 – waste ink absorber full
  • 1700 – ink absorber almost full
  • 5B02 – ink absorber full (reset required)

These errors do not mean your Canon TS704a is damaged. It only means the internal waste ink counter reached 100% and must be reset.

WICReset Connect resets the counter safely in about 2 minutes.

Video Instructions – Canon Reset Tutorial

Watch the official Canon reset tutorial with voice-over and step-by-step explanation:

Open Video Instructions (Canon)

Available in 10 languages. Follow the video for a fast, safe reset.

FAQ – Canon TS704a Reset

What is a waste ink counter?

It’s an internal counter that tracks how much waste ink was collected.

Why does the Canon TS704a stop printing?

When the counter reaches the limit, the printer locks for safety.

Do I need any special cables?

Just a standard USB cable is required.

Can I damage the printer during reset?

No, the reset is software-based and safe.

Do I need to reinstall drivers?

Typically no, Windows detects the printer automatically.

Reset Your Canon TS704a Now

Reset your Canon TS704a now and remove waste ink errors using WICReset Connect and a valid reset key.

Buy Reset Key Supported Models

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.

Pridaj komentár

×

Cart