Skip to content
WICRESETPROPrinter diagnostics, reset & servicePRO — Print Reset Online
Cart 0Buy a key
Home / Printer guides / Canon TS6260

MODEL GUIDE · PRIVATE DRAFT

Canon TS6260 Waste Ink Reset & Service Mode

WICRESETPROCanon TS6260Read • reset • verify

Canon / step-by-step guide

Canon TS6260

How to enter service mode

Power cable connectedUSB connection to the computerFinish any current print job
Green: HOLDGold: PRESS

Click the image: play / pause

Step 1 of 6Ready to play

Turn off the printer.

Press POWER and wait for the printer to turn off. Leave the power cable and USB cable connected.

POWER · press and release

At your own pace. Pause the animation at any time. You can also select a step on the bar below or use the arrows.

0:00 / 0:32

Space: play / pause · ← →: change step

Complete step-by-step instructions

  1. Turn off the printer.
    Press POWER and wait for the printer to turn off. Leave the power cable and USB cable connected.
  2. Hold STOP.
    Press and hold STOP. Keep holding it throughout the next step.
  3. Also hold POWER.
    While holding STOP, press and hold POWER. Wait for the indicator light to come on.
  4. Release STOP. Hold POWER.
    Release only STOP. Keep POWER held down.
  5. Press STOP 5 times.
    Keep holding POWER. Press and release STOP exactly 5 times. One press means pressing and then releasing the button.
  6. Release POWER.
    Release POWER. Wait for the printer to finish starting up, then check the connection in the program.

POWER = power button (ON). STOP may be labelled RESET, RESUME or CANCEL. Do not count the initial hold as a press.

Canon service mode · TS6260 →

Canon TS6260 is supported for waste ink counter reset in WICRESETPRO. Use a USB connection and the preparation instructions for this exact model in the app.

Canon TS6260 · waste ink absorber reset

Looking for a Canon TS6260 resetter? Start with the printer status, not the activation key. The TS6260 must have no unrelated faults and must be recognized in the correct service mode before WICRESETPRO can perform the waste ink reset.

model-specific service modeWindows 10/11 x64Direct USB onlyOfficial WIC software

The download is free. a key allows same-printer reuse for 24 hours after the first reset and has no expiry date before use. Orders are normally delivered automatically by email in about one minute.

Quick diagnosis

Canon TS6260 reset in three controlled stages

1

Check the error

Confirm that the TS6260 shows a waste ink or absorber warning, not an unrelated mechanical or cartridge error.

2

Enter service mode

Use only a confirmed instruction for this exact model. Check the service-mode status above before preparing the printer.

3

Reset and restart

Run WICRESETPRO, keep USB stable, then switch the printer off when instructed by the procedure, then follow its restart instructions.

Before using a key: the printer must have no pending jobs or unrelated errors. Use one direct USB connection and leave only the target Canon TS6260 connected.

Understand the warning

Why Canon TS6260 shows errors 5B00–5B04 or 1700

The Canon TS-series home printer estimates how much waste ink has been collected during cleaning and maintenance. When the programmed limit is reached, the printer may display 1700 as an advance warning or stop with 5B00 and a waste ink absorber message. The reset clears that electronic counter; it does not fix an unrelated print-head, cartridge or power fault.

For this Canon model, WICRESETPRO performs the counter operation after service mode is accepted. Use the Pro key assigned to your order. Disconnect other Epson and Canon equipment, keep only the TS6260 attached and wait for a clear success message before restarting.

Official developer

Use the official WICRESETPRO download and a key intended for this workflow, with technical support available if the program returns an error.

Reset support

Keep the program message and order details if a valid attempt fails. A failed attempt can be reviewed instead of repeating random steps.

No pre-use expiry

An unused activation key does not expire. One key is consumed by the same printer during its 24-hour access period on one supported printer.

Resettable Canon absorber codes: on supported models, WICRESETPRO can clear the waste ink counter behind Canon support codes 5B00, 5B01, 5B02, 5B03 and 5B04. The exact code displayed depends on the printer and region.

Physical maintenance still matters: software resets the electronic counter only. If ink is leaking or the absorber/pads are saturated, clean or replace the maintenance components before continued printing.

Service-mode preparation for Canon TS6260

Follow the full model-specific procedure above, including preparation and any explicitly assigned alternative. Read the complete service-mode instructions above. This documentation status does not change confirmed reset support.

Requirements and common mistakes

Prepare the Canon TS6260 before activation

Required setup

  • A Windows 10/11 x64 computer.
  • Direct USB data cable connected without a hub or splitter.
  • Only the target Canon TS6260 connected; remove other Epson or Canon equipment.
  • No pending print documents and no unrelated printer error.
  • Stable power for the complete reset and restart.
  • Correct model-specific service mode before starting the reset in WICRESETPRO.

Avoid these failed attempts

  • Do not use Wi-Fi or a network-only connection.
  • Use the Pro key assigned to your order.
  • Do not disconnect USB or power while the program is writing.
  • Do not confuse a waste ink warning with a print-head or cartridge failure.
  • Do not repeat head cleaning unnecessarily after the reset.
  • Save the complete message or log before asking for support.

Verify another model in the supported printer finder.

Troubleshooting

If the Canon TS6260 reset does not start

Printer is not detected

Change to a direct motherboard USB port, remove hubs, try another data-capable cable and disconnect other Canon or Epson devices. Restart Windows if the maintenance device was not installed correctly.

The printer still shows another error

Write down the exact code and check cartridges, paper path and power status. WICRESETPRO cannot bypass an unrelated fault that prevents the printer from reaching the required maintenance state.

Warning returns after restart

Confirm that the program reported success and that the printer was switched off as requested by the procedure. Check the exact counter or error again rather than assuming every service message is the waste ink counter.

Frequently asked questions

Ready to continue?

Reset the Canon TS6260 with the correct workflow

Confirm the model, connection and printer status first. Then use WICRESETPRO with one activation key and keep the result message until the printer has restarted normally.

Prepare Canon TS6260

Choose the application version for the documented operation on Canon TS6260. Do not infer the availability of every service tool from the existence of a platform download.

WICRESETPRO · Windows 7 / 8 / 8.1

The Canon module uses USB. Follow the service-mode procedure shown for the exact model and firmware in the app. Do not substitute a button sequence from a nearby model.

Keep internet access available for model data and operation approval. Clear pending print jobs and keep the printer’s power and data connection stable. Available in 60 interface languages.

Download WICRESETPRO

WICRESET.INFO

Canon — Instructions

USB
Service mode
Service mode

Put your Canon printer into service mode by following the program's instructions for your model.

Canon · USB
Step 1 / 5

Service mode

Put your Canon printer into service mode by following the program's instructions for your model.

Instructions

Open WICRESETPRO and connect your Canon printer using a USB cable.

  1. Service mode

    Put your Canon printer into service mode by following the program's instructions for your model.

  2. Read counters

    Select your printer and read the waste ink counters. Wait for the percentages to appear.

  3. Reset key

    Copy your complete 12-character key from the TXT attachment and paste it into the program's key field.

  4. Reset

    Click Reset. Wait for the success message and 0% readings. Do not turn off the printer or disconnect USB during the reset.

  5. Restart

    After a successful reset, turn the printer off using its power button. Wait 10 seconds, then turn it on again.

Need help?

Include your order number, printer model and error message. Attach a screenshot.

A1B2C3D4E5F6 is an inactive example. Use your own key.

wicreset@wicreset.infoWhatsApp: +48 884 867 771

Read, reset and verify Canon TS6260

  1. Use the USB connection and the model-specific service mode requested by WICRESETPRO. Wait for stable detection before continuing.
  2. Read the available waste ink counters in WICRESETPRO and wait for a completed result. A missing reading is not a zero reading.
  3. Waste ink counter reset is supported for this model. Select that operation and follow its preparation instructions in the app.
  4. For a supported full reset, enter your valid Pro reset key and start the operation. Keep the connection stable until the app reports the result.
  5. Restart only when instructed, then read the counters again in Pro to verify the outcome.

Once a supported printer is connected and ready, the reset itself can take about a minute. Installation and preparation can take longer.

Resetting a counter does not replace physical absorber maintenance.

Your reset key

Unused keys do not expire. After the first reset, you can reuse the key on the same printer for 24 hours. Unused units in a Multi-Key pool do not all expire when that printer’s reuse period ends.

Choose one Multi-Key with the purchased pool or the corresponding number of separate codes. Check the current product, price and currency in the store.

Download WICRESETPRO ↓Choose reset keys ↗

For the wider application feature set, see printer diagnostics and maintenance in WICRESETPRO. Functions shown there are model-dependent.

Questions and answers

How do I reset the Canon TS6260 waste ink counter?

Prepare a direct USB connection, enter the correct model-specific service mode and run WICRESETPRO with one valid key. Restart the printer after the success message.

Can Canon TS6260 be reset over Wi-Fi?

Use a USB cable for Canon TS6260 service procedures in WICRESETPRO. Its normal printing connection does not replace the USB service connection.

Can I reset Canon TS6260 with buttons only?

The button sequence prepares the Canon printer for the required service operation. It does not by itself reset the waste ink counter. Use the supported procedure in WICRESETPRO after detection.

How many STOP/RESET presses does Canon TS6260 use?

The current model-specific sequence is shown in the service-mode instructions above. See the service-mode instructions above; reset support is recorded separately.

Does an unused reset key expire?

Unused keys have no expiry date. After the first reset, the key can be reused on the same printer for 24 hours. Unused Multi-Key units remain available.

Does software replace the physical absorber?

No. The program clears the electronic counter. A saturated or leaking absorber must be cleaned or replaced before continued printing.

What should I save if the reset fails?

Keep the order email, key, screenshot and complete program message or log. Do not repeatedly change the procedure without recording the result.

A LITTLE HELP. BACK TO PRINTING.

Need help? We’re here 24/7.

Contact our team by email or WhatsApp. Please include your order number and printer model so we can help you quickly.

Just exploring? You’re welcome to ask before ordering.
Email support ↗wicreset@wicreset.infoWhatsApp support ↗+48 884 867 771Contact page →
Editorial preview · source & SEO

Local review of existing post ID 3729. Original production URL and language assignments are preserved. The migration panel records whether the proposal has been applied to this test copy.

Title: Canon TS6260 Reset: Fix 5B00–5B04 | WIC Reset
Description: Reset Canon TS6260 errors 5B00, 5B01, 5B02, 5B03 and 5B04. Follow the correct service-mode and USB procedure with WICRESETPRO software.

owner-confirmed-basic-reset