Complete Reset for Epson WorkForce 545: Service Required / E11 Resolved
When your Epson WorkForce 545 shows Error E11 or Service required, or warns Ink Pad Needs Service, the internal waste ink counter has reached its limit. Use WicReset Connect with a reset key to clear it in about 2 minutes. Keys start from 6 EUR. Works on Windows 7–11 via USB only.
Typical Signs on Epson WorkForce 545
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson WorkForce 545 stops
Reaching the waste ink counter limit makes Epson WorkForce 545 display E10, E11, E12, E91/Service required. A reset typically restores service with no hardware swap.
Quick facts – Epson WorkForce 545 reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson WorkForce 545 | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson WorkForce 545. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson WorkForce 545
- Connect Epson WorkForce 545 to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson WorkForce 545
Why blocked if pads aren’t full?
The counter is an estimate; it can lock before physical saturation.
Does resetting change ink levels?
No — it affects only the waste ink counter.
Can I reset over a USB hub?
Use a direct, high-quality USB cable for best stability.
Will I lose settings?
No — network/print settings remain.
Can I print immediately after reset?
Yes — power-cycle the printer and it’s ready.
Tips for Epson WorkForce 545 reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson WorkForce 545 reset instructions using WicReset Connect.
English 
Čeština 
Deutsch 
Español 
Français 
Hrvatski 
Magyar 
Italiano 
Nederlands 
Português 
Slovenščina 
Українська 
Română 
Nederlands (België) 
Bahasa Indonesia 
Български 
Português do Brasil 
Slovenčina 
Türkçe 
Tiếng Việt