Epson and Canon ink pad service error reset guide for E11, Service Required and 5B00
Epson L3258 reset – Fix Error E11 / “Service required” (Windows USB)

Epson L3258 – Reset & Fix Error E11

Quick reset of the waste ink counter on Epson L3258 with WicReset Connect. Works on Windows 7–11 via USB. Reset keys start at 6 EUR.

🔑 Buy Reset Key (from 6 EUR) ⬇️ Download WicReset Connect

Clear “Service required” on Epson L3258

If your Epson L3258 displays Error E11 or “The ink pad needs service”, the waste ink counter reached 100%. Resetting it with WicReset Connect restores normal use.

Quick facts – Epson L3258 reset

ModelErrorSolutionSupported OSReset time
Epson L3258Error E11 / Service requiredWicReset ConnectWindows 7–11 (USB)~2 minutes

Symptoms

  • Printer does not print, warning LEDs flashing.
  • Error messages: Error E11, Service required, Ink pad end of service life.
  • Maintenance counter shows close to 100%.

Why does Epson L3258 show “Service required”?

The Epson L3258 estimates waste ink levels via a software counter. When it reaches the maximum limit, the printer locks. Resetting this counter with WicReset Connect clears the block.

Download reset tool & official driver

⬇️ Download WicReset Connect (Windows 7–11)

Official driver for the L3250 Series (covers Epson L3258) via Epson Setup Navi:

⬇️ Download Epson L3250 Series driver

Instructional Video – Epson L3258 reset

▶️ Watch the official WicReset Connect tutorial

ℹ️ Video available in 10 languages with professional voice-over.

Step-by-step reset (Epson L3258)

  1. Connect Epson L3258 to your PC with a USB cable.
  2. Run WicReset Connect and verify printer detection.
  3. Enter your reset key and press Reset.
  4. Wait 2 minutes, turn off the printer for 10s, then power it on again.
🔑 Buy Reset Key (from 6 EUR) ⬇️ Download WicReset Connect

FAQ – Epson L3258

Does reset remove Error E11?

✅ Yes, it restores printing immediately.

Are the pads really full?

No, it’s only the counter.

Does reset work over Wi-Fi?

❌ No, USB only.

How long will it last?

Until the counter fills again after many prints/cleanings.

More about Epson L3258 reset

  • Tip Reset when usage reaches ~95%.
  • Limit unnecessary head cleaning cycles.
  • Always use a good quality USB cable.
  • Reset keys available from 6 EUR.
🔑 Buy Reset Key (from 6 EUR) ⬇️ Download WicReset Connect

Related Epson models

This page covers Epson L3258 specifically.

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.