Epson L3257 – Reset & Fix Error E11
Reset the waste ink counter on Epson L3257 quickly using WicReset Connect. Works on Windows 7–11 via USB. Reset keys available from 6 EUR.
Clear “Service required” on Epson L3257
If your Epson L3257 displays Error E11 or “Ink pad needs service”, it means the waste ink counter is full. Resetting with WicReset Connect restores normal printing.
Quick facts – Epson L3257 reset
| Model | Error | Solution | Supported OS | Reset time |
|---|---|---|---|---|
| Epson L3257 | Error E11 / Service required | WicReset Connect | Windows 7–11 (USB) | ~2 minutes |
Symptoms
- Printer refuses to print, lights blinking.
- Error messages: Error E11, Service required, Ink pad end of service life.
- Maintenance counter near 100%.
Why does Epson L3257 show “Service required”?
The Epson L3257 tracks cleaning cycles and ink waste in a counter. Once it reaches its programmed maximum, printing is disabled. Resetting this counter with WicReset Connect clears the lock.
Download reset tool & official driver
Official driver is available via Epson Setup Navi for the L3250 Series (includes Epson L3257):
⬇️ Download Epson L3250 Series driver
Instructional Video – Epson L3257 reset
▶️ Watch official WicReset Connect tutorial
ℹ️ Video is available in 10 languages with voice-over.
Step-by-step reset (Epson L3257)
- Connect Epson L3257 to your PC with a USB cable.
- Run WicReset Connect and check if the printer is detected.
- Enter your purchased reset key and click Reset.
- Wait ~2 minutes, power off for 10s, then power on again.
FAQ – Epson L3257
Does reset clear Error E11?
✅ Yes — it restores printing instantly.
Are the pads physically full?
No, it’s only the counter reaching max.
Can reset be done via Wi-Fi?
❌ No, only via USB.
How long does it last?
Until the counter fills again after thousands of prints/cleans.
More about Epson L3257 reset
- Tip Perform reset at ~95% usage.
- Avoid unnecessary cleaning cycles.
- Always use a quality USB cable.
- Keys start from just 6 EUR.
Related Epson models
- Epson L3217 reset
- Epson L3218 reset
- Epson L3219 reset
- Epson L3250 reset
- Epson L3251 reset
- Epson L3253 reset
- Epson L3255 reset
- Epson L3256 reset
- Epson L3258 reset
This page covers Epson L3257 specifically.
Fix “The Ink Pad Needs Service” Error – Supported Epson Models
What you need
- WicReset Connect key (only about €6 – the cheapest option)
- Windows PC
- USB cable
Time required
About 2 minutes
Difficulty
Very easy
Works for errors
- Epson: E10, E11, E12, E91 and similar service errors
- Canon: 1700, 5800 and similar waste ink / support code errors
- Messages like “Waste ink counter full”, “Ink pad at the end of its service life”
Supported printer series
Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.
Reset Epson ink pad service
If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.
- Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
- Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
- No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.
FAQ (short)
Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.
Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.

