Epson L3250 Waste Ink Counter Reset – Fix Error E11 / Service Required
Epson L3250 may stop printing and show Error E11, “Service required” or “The ink pad needs service” when the waste ink counter reaches its limit. This guide explains a fast reset using WicReset Connect on Windows 7–11 via USB. Reset keys from 6 EUR.
Clear “Service required” on Epson L3250 – Quick USB reset
If your Epson L3250 shows Error E11 or “The ink pad needs service”, the waste ink counter has reached its software limit. Resetting with WicReset Connect removes this block and restores normal printing.
Quick facts – Epson L3250 reset
| Model | Error | Solution | Supported OS | Time |
|---|---|---|---|---|
| Epson L3250 | Error E11 / Service required | WicReset Connect | Windows 7–11 (USB) | ~2 minutes |
Symptoms
- Printer blocked from printing, flashing LEDs.
- Error messages: Service required, Error E11, Ink pad end of service life.
- Waste ink counter close to 100% in maintenance tools.
Epson L3250 error messages you may see
- Service required
- Error E11
- The ink pad needs service
- A printer’s ink pad is at the end of its service life
- Ink pad counter overflow
Different wording depends on region/driver version — the cause is the same: the waste ink counter limit.
Why does Epson L3250 show “Service required”?
The L3250 tracks waste ink usage in a counter. When it reaches a threshold, the printer blocks printing as a safety/service reminder. This is a software lock, and resetting the counter with WicReset Connect restores printing.
Download reset tool & official driver
Official Epson driver for L3250 Series:
⬇️ Download Epson L3250 driver via Setup Navi
Instructional Video – How to Reset Epson L3250
▶️ Watch the official WicReset Connect tutorial
ℹ️ Available in 10 languages with voice-over.
Step-by-step reset (Epson L3250)
- Connect Epson L3250 to your computer via USB cable (Wi-Fi reset does not work).
- Run WicReset Connect and confirm the printer is detected.
- Enter your purchased reset key and click Reset.
- Wait ~2 minutes, power off for 10 seconds, then power back on.
Troubleshooting (common issues)
Printer not detected
Use a different USB port/cable, install the official Epson driver, and restart WicReset Connect. Avoid USB hubs.
Reset button is greyed out
Make sure the correct printer is selected and the device is connected via USB (not Wi-Fi).
Error still shows after reset
Turn the printer off for 10 seconds and power it on again. If needed, run the reset once more (do not interrupt the process).
FAQ – Epson L3250
Does the reset clear Error E11?
✅ Yes — resetting the waste ink counter removes Error E11 / Service required and the printer will print again.
Are pads physically full?
Usually not. The warning is triggered by a counter limit, not by physical pad sensors.
Does it work on macOS?
No — this reset method is for Windows 7/8/10/11 and requires a USB connection.
Do I need to replace pads after reset?
Most users only need the counter reset to continue printing. Heavy printing over time can saturate pads physically, so servicing may be needed later.
How long does it last?
It lasts until the counter reaches the limit again (usually after thousands of pages, depending on usage/cleaning cycles).
More about Epson L3250 reset
- Tip Perform reset when counter reaches ~95%.
- Limit unnecessary cleaning cycles to avoid filling the counter too quickly.
- Always use a good USB cable for reset stability.
- Reset keys cost from 6 EUR.
Related Epson models
- Epson L3217 reset
- Epson L3218 reset
- Epson L3219 reset
- Epson L3251 reset
- Epson L3253 reset
- Epson L3255 reset
- Epson L3256 reset
- Epson L3257 reset
- Epson L3258 reset
This page covers Epson L3250 specifically.
English 
Čeština 
Deutsch 
Español 
Français 
Hrvatski 
Magyar 
Italiano 
Nederlands 
Português 
Slovenščina 
Українська