Guia de reinicialização do erro de manutenção do tampão de tinta da Epson e da Canon para os códigos E11, «Service Required» e 5B00
Epson L3250 Waste Ink Counter Reset – Fix Error E11 / Service Required (USB)

Epson L3250 Waste Ink Counter Reset – Fix Error E11 / Service Required

Epson L3250 may stop printing and show Erro E11, “Service required” ou “The ink pad needs service” quando o contador de tinta residual reaches its limit. This guide explains a fast reset using WicReset Conectar on Windows 7-11 via USB. Reset keys from 6 EUR.

🔑 Buy Reset Key (from 6 EUR) ⬇️ Descarregar WicReset Connect

Clear “Service required” on Epson L3250 – Quick USB reset

If your Epson L3250 shows Erro E11 ou “The ink pad needs service”, the waste ink counter has reached its software limit. Resetting with WicReset Conectar removes this block and restores normal printing.

Quick facts – Epson L3250 reset

ModeloErroSoluçãoSO suportadoTime
Epson L3250Erro E11 / Serviço necessárioWicReset ConectarWindows 7-11 (USB)~2 minutos

Sintomas

  • Printer blocked from printing, flashing LEDs.
  • Error messages: Serviço necessário, Erro E11, Ink pad end of service life.
  • Waste ink counter close to 100% in maintenance tools.

Epson L3250 error messages you may see

  • Serviço necessário
  • Erro E11
  • The ink pad needs service
  • A printer’s ink pad is at the end of its service life
  • Ink pad counter overflow

Different wording depends on region/driver version — the cause is the same: the waste ink counter limit.

Why does Epson L3250 show “Service required”?

The L3250 tracks waste ink usage in a counter. When it reaches a threshold, the printer blocks printing as a safety/service reminder. This is a software lock, and resetting the counter with WicReset Conectar restores printing.

Download reset tool & official driver

⬇️ Descarregar WicReset Connect (Windows 7-11)

Official Epson driver for L3250 Series:

⬇️ Download Epson L3250 driver via Setup Navi

Instructional Video – How to Reset Epson L3250

▶️ Watch the official WicReset Connect tutorial

ℹ️ Available in 10 línguas with voice-over.

Step-by-step reset (Epson L3250)

  1. Connect Epson L3250 to your computer via USB cable (Wi-Fi reset does not work).
  2. Run WicReset Conectar and confirm the printer is detected.
  3. Introduzir o produto adquirido tecla de reposição e clique em Reiniciar.
  4. Wait ~2 minutes, power off for 10 seconds, then power back on.

Troubleshooting (common issues)

Printer not detected

Use a different USB port/cable, install the official Epson driver, and restart WicReset Connect. Avoid USB hubs.

Reset button is greyed out

Make sure the correct printer is selected and the device is connected via USB (not Wi-Fi).

Error still shows after reset

Turn the printer off for 10 seconds and power it on again. If needed, run the reset once more (do not interrupt the process).

🔑 Buy Reset Key (from 6 EUR) ⬇️ Descarregar WicReset Connect

FAQ – Epson L3250

Does the reset clear Error E11?

✅ Yes — resetting the waste ink counter removes Erro E11 / Serviço necessário and the printer will print again.

As almofadas estão fisicamente cheias?

Usually not. The warning is triggered by a counter limit, not by physical pad sensors.

Does it work on macOS?

No — this reset method is for Windows 7/8/10/11 and requires a USB connection.

Do I need to replace pads after reset?

Most users only need the counter reset to continue printing. Heavy printing over time can saturate pads physically, so servicing may be needed later.

How long does it last?

It lasts until the counter reaches the limit again (usually after thousands of pages, depending on usage/cleaning cycles).

More about Epson L3250 reset

  • Dica Perform reset when counter reaches ~95%.
  • Limit unnecessary cleaning cycles to avoid filling the counter too quickly.
  • Always use a good USB cable for reset stability.
  • Reset keys cost from 6 EUROS.
🔑 Buy Reset Key (from 6 EUR) ⬇️ Descarregar WicReset Connect

Modelos Epson relacionados

This page covers Epson L3250 specifically.

Corrigir o erro “A almofada de tinta precisa de manutenção” - Modelos Epson suportados

O que é necessário

  • Tecla WicReset Connect (apenas cerca de 6 euros - a opção mais económica)
  • PC com Windows
  • Cabo USB

Tempo necessário

Cerca de 2 minutos

Dificuldade

Muito fácil

Funciona para erros

  • Epson: E10, E11, E12, E91 e erros de serviço semelhantes
  • Canon: 1700, 5800 e similares resíduos de tinta / erros de código de suporte
  • Mensagens como “Contador de tinta residual cheio”, “Almofada de tinta no fim da sua vida útil”

Séries de impressoras suportadas

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, série L, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF e muitas outras séries populares.

Reiniciar o serviço de almofadas de tinta Epson

Se a Epson apresentar mensagens como “A almofada de tinta está no fim da sua vida útil”, “Serviço de almofada de tinta necessário” ou “Almofada de tinta residual cheia”, pode reiniciar o serviço de almofada de tinta Epson utilizando uma chave WicReset Connect. O programa reinicia o contador interno de resíduos de tinta, para que a impressora volte a funcionar sem ter de se deslocar a um centro de assistência.

  • Corrige os avisos “Epson ink pad service” / “Service required” em poucos minutos.
  • Funciona como reiniciar o serviço de almofadas de tinta Epson solução para a maioria das impressoras EcoTank, série L, série ET, XP, WF e Stylus.
  • Não é necessário um reiniciador de hardware - apenas um PC com Windows, um cabo USB e o WicReset Connect.

FAQ (curta)

P: É necessário substituir a almofada de tinta física?
R: Na maioria dos casos domésticos e de escritório, basta repor o contador de resíduos de tinta com o WicReset Connect e continuar a utilizar a impressora normalmente.

P: Trata-se de uma reposição única?
R: Cada tecla repõe o contador uma vez. Pode repetir o procedimento no futuro com outra tecla se a mensagem voltar a aparecer.

Tags: , , , , , , , , , , , , , ,