Navodila za ponastavitev napak pri vzdrževanju blazinic za črnilo pri tiskalnikih Epson in Canon za napake E11, »Service Required« in 5B00
Epson L3250 Waste Ink Counter Reset – Fix Error E11 / Service Required (USB)

Epson L3250 Waste Ink Counter Reset – Fix Error E11 / Service Required

Epson L3250 may stop printing and show Napaka E11, “Potrebna je storitev” ali “The ink pad needs service” ko števec odpadnega črnila reaches its limit. This guide explains a fast reset using WicReset Connect on Windows 7–11 via USB. Reset keys from 6 EUR.

🔑 Buy Reset Key (from 6 EUR) ⬇️ Prenos WicReset Connect

Clear “Service required” on Epson L3250 – Quick USB reset

If your Epson L3250 shows Napaka E11 ali “The ink pad needs service”, the waste ink counter has reached its software limit. Resetting with WicReset Connect removes this block and restores normal printing.

Quick facts – Epson L3250 reset

ModelNapakaRešitevPodprti operacijski sistemTime
Epson L3250Napaka E11 / Potrebna je storitevWicReset ConnectWindows 7–11 (USB)~2 minuti

Symptoms

  • Printer blocked from printing, flashing LEDs.
  • Error messages: Zahtevana storitev, Napaka E11, Ink pad end of service life.
  • Waste ink counter close to 100% in maintenance tools.

Epson L3250 error messages you may see

  • Zahtevana storitev
  • Napaka E11
  • The ink pad needs service
  • A printer’s ink pad is at the end of its service life
  • Ink pad counter overflow

Different wording depends on region/driver version — the cause is the same: the waste ink counter limit.

Why does Epson L3250 show “Service required”?

The L3250 tracks waste ink usage in a counter. When it reaches a threshold, the printer blocks printing as a safety/service reminder. This is a software lock, and resetting the counter with WicReset Connect restores printing.

Download reset tool & official driver

⬇️ Download WicReset Connect (Windows 7–11)

Official Epson driver for L3250 Series:

⬇️ Download Epson L3250 driver via Setup Navi

Instructional Video – How to Reset Epson L3250

▶️ Watch the official WicReset Connect tutorial

ℹ️ Available in 10 jezikov with voice-over.

Step-by-step reset (Epson L3250)

  1. Connect Epson L3250 to your computer via USB cable (Wi-Fi reset does not work).
  2. Run WicReset Connect and confirm the printer is detected.
  3. Vnesite svoj kupljeni tipka za ponastavitev in kliknite Ponastavitev.
  4. Wait ~2 minutes, power off for 10 seconds, then power back on.

Troubleshooting (common issues)

Printer not detected

Use a different USB port/cable, install the official Epson driver, and restart WicReset Connect. Avoid USB hubs.

Reset button is greyed out

Make sure the correct printer is selected and the device is connected via USB (not Wi-Fi).

Error still shows after reset

Turn the printer off for 10 seconds and power it on again. If needed, run the reset once more (do not interrupt the process).

🔑 Buy Reset Key (from 6 EUR) ⬇️ Prenos WicReset Connect

FAQ – Epson L3250

Does the reset clear Error E11?

✅ Yes — resetting the waste ink counter removes Napaka E11 / Potrebna je storitev and the printer will print again.

Are pads physically full?

Usually not. The warning is triggered by a counter limit, not by physical pad sensors.

Does it work on macOS?

No — this reset method is for Windows 7/8/10/11 and requires a USB connection.

Do I need to replace pads after reset?

Most users only need the counter reset to continue printing. Heavy printing over time can saturate pads physically, so servicing may be needed later.

How long does it last?

It lasts until the counter reaches the limit again (usually after thousands of pages, depending on usage/cleaning cycles).

More about Epson L3250 reset

  • Nasvet Perform reset when counter reaches ~95%.
  • Limit unnecessary cleaning cycles to avoid filling the counter too quickly.
  • Always use a good USB cable for reset stability.
  • Reset keys cost from 6 EUR.
🔑 Buy Reset Key (from 6 EUR) ⬇️ Prenos WicReset Connect

Sorodni Epsonovi modeli

This page covers Epson L3250 specifically.

Odpravite napako “Podloga za črnilo potrebuje servis” - podprti modeli Epson

Kaj potrebujete

  • WicReset Priključite tipko (samo približno 6 € - najcenejša možnost)
  • Računalnik z operacijskim sistemom Windows
  • Kabel USB

Potreben čas

Približno 2 minuti

Težavnost

Zelo enostavno

Deluje za napake

  • Epson: E10, E11, E12, E91 in podobne servisne napake
  • Canon: 1700, 5800 in podobne napake pri uporabi odpadnega črnila / podporne kode
  • Sporočila, kot so “Poln števec odpadnega črnila”, “Blazinica za črnilo je na koncu življenjske dobe”.”

Podprte serije tiskalnikov

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, serija L, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF in številne druge priljubljene serije.

Ponastavitev servisa črnilne blazinice Epson

Če vaš Epson prikazuje sporočila, kot so “Blazinica za črnilo je na koncu življenjske dobe”, “Potrebna je storitev črnilne blazinice” ali “Polna blazinica za odpadno črnilo”, lahko ponastavitev servisne storitve Epsonove črnilne blazinice s ključem WicReset Connect. Program ponastavi notranji števec odpadnega črnila, tako da tiskalnik spet deluje brez obiska servisnega centra.

  • V nekaj minutah odpravi opozorila “Epson ink pad service” / “Service required”.
  • Deluje kot ponastavitev servisa črnilne blazinice Epson rešitev za večino tiskalnikov EcoTank, L-series, ET-series, XP, WF in Stylus.
  • Ponastavitev strojne opreme ni potrebna - samo računalnik z operacijskim sistemom Windows, kabel USB in program WicReset Connect.

Pogosta vprašanja in odgovori (kratek film)

V: Ali moram zamenjati fizično blazinico za črnilo?
O: V večini domačih in pisarniških primerov lahko s programom WicReset Connect samo ponastavite števec odpadnega črnila in tiskalnik še naprej normalno uporabljate.

V: Ali gre za enkratno ponastavitev?
O: Vsaka tipka enkrat ponastavi števec. Če se sporočilo ponovno prikaže, lahko postopek v prihodnosti ponovite z drugo tipko.

Tags: , , , , , , , , , , , , , ,