Navodila za ponastavitev napak pri vzdrževanju blazinic za črnilo pri tiskalnikih Epson in Canon za napake E11, »Service Required« in 5B00
Reset Epson L3217 fast – Clear Error E11 / “Service required” (USB, Win 7–11)

Epson L3217 – Reset & Fix Error E11

Quick reset of the števec odpadnega črnila on Epson L3217 using WicReset Connect. Works on Windows 7–11 via USB. Ponastavitev tipk iz 6 EUR.

🔑 Buy Reset Key (from 6 EUR) ⬇️ Prenos WicReset Connect

How to reset Epson L3217 printer – Waste ink counter full (Service required)

If your Epson L3217 shows Napaka E11 ali “The ink pad needs service”, notranji števec odpadnega črnila has reached its limit. After a reset with WicReset Connect, the printer returns to normal operation.

Quick facts – Epson L3217 reset

ModelNapakaFixOS supportČas ponastavitve
Epson L3217Napaka E11 / Potrebna je storitevWicReset ConnectWindows 7–11 (USB)~2 minuti

Symptoms

  • Printer refuses to print; red/orange LEDs flashing.
  • Messages: Zahtevana storitev, Ink pad end of service life, ali Napaka E11.
  • Utility apps show waste ink counter near 100%.

Why does “Service required” appear?

Epson devices like the L3217 estimate waste ink accumulation during cleaning cycles and store it in a counter. When the counter reaches a threshold, the printer blocks printing to prevent overflow. The fix is to reset the counter uporaba WicReset Connect.

Download the reset tool & official driver

⬇️ Download WicReset Connect (Windows 7–11)

Official driver / installer via Epson Setup Navi for the L3210 Series (covers L3217 variants in the series):

⬇️ Open Epson Setup Navi – select L3210 Series and your OS

Instructional Video – How to Reset Epson L3217

Watch this step-by-step video showing how to reset Epson printers (including L3217) using WicReset Connect.

▶️ Watch the official WicReset Connect video tutorial

ℹ️ The video instructions are available with voice-over in 10 jezikov, making it easy to follow worldwide.

Step-by-step reset (Epson L3217)

  1. Connect the Epson L3217 to your computer with a USB cable (reset over Wi‑Fi doesn’t work).
  2. Run WicReset Connect and confirm the printer is detected.
  3. Vnesite svoj kupljeni tipka za ponastavitev in kliknite Ponastavitev.
  4. Wait about 2 minutes, then turn the printer off for 10 seconds and power it back on.
🔑 Buy Reset Key (from 6 EUR) ⬇️ Prenos WicReset Connect

FAQ – Epson L3217

Does the reset remove Error E11?

✅ Yes — resetting the waste ink counter removes the error and unlocks printing.

Are the pads actually full?

Usually not. The warning is based on a counter, not a live sensor.

Which systems are supported?

Windows 7/8/10/11, USB connection only for the reset.

How long does the reset last?

Permanent until the counter fills again, usually after thousands of pages or cleaning cycles.

Does it work via Wi‑Fi?

No, the reset must be done with a USB cable.

More about Epson L3217 reset

  • Nasvet Reset when the counter is ~95% — don’t wait for 100%.
  • Avoid unnecessary head cleanings (they add quickly to the counter).
  • Use a reliable USB cable during the reset for best detection.
  • Price hint: reset keys start from 6 EUR.

If the download link doesn’t open, search for WicReset Connect in Google and return here to buy the key.

🔑 Buy Reset Key (from 6 EUR) ⬇️ Prenos WicReset Connect

Sorodni Epsonovi modeli

Note: WicReset Connect resets supported Epson/Canon models via USB on Windows. This page covers Epson L3217 specifically.

Odpravite napako “Podloga za črnilo potrebuje servis” - podprti modeli Epson

Kaj potrebujete

  • WicReset Priključite tipko (samo približno 6 € - najcenejša možnost)
  • Računalnik z operacijskim sistemom Windows
  • Kabel USB

Potreben čas

Približno 2 minuti

Težavnost

Zelo enostavno

Deluje za napake

  • Epson: E10, E11, E12, E91 in podobne servisne napake
  • Canon: 1700, 5800 in podobne napake pri uporabi odpadnega črnila / podporne kode
  • Sporočila, kot so “Poln števec odpadnega črnila”, “Blazinica za črnilo je na koncu življenjske dobe”.”

Podprte serije tiskalnikov

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, serija L, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF in številne druge priljubljene serije.

Ponastavitev servisa črnilne blazinice Epson

Če vaš Epson prikazuje sporočila, kot so “Blazinica za črnilo je na koncu življenjske dobe”, “Potrebna je storitev črnilne blazinice” ali “Polna blazinica za odpadno črnilo”, lahko ponastavitev servisne storitve Epsonove črnilne blazinice s ključem WicReset Connect. Program ponastavi notranji števec odpadnega črnila, tako da tiskalnik spet deluje brez obiska servisnega centra.

  • V nekaj minutah odpravi opozorila “Epson ink pad service” / “Service required”.
  • Deluje kot ponastavitev servisa črnilne blazinice Epson rešitev za večino tiskalnikov EcoTank, L-series, ET-series, XP, WF in Stylus.
  • Ponastavitev strojne opreme ni potrebna - samo računalnik z operacijskim sistemom Windows, kabel USB in program WicReset Connect.

Pogosta vprašanja in odgovori (kratek film)

V: Ali moram zamenjati fizično blazinico za črnilo?
O: V večini domačih in pisarniških primerov lahko s programom WicReset Connect samo ponastavite števec odpadnega črnila in tiskalnik še naprej normalno uporabljate.

V: Ali gre za enkratno ponastavitev?
O: Vsaka tipka enkrat ponastavi števec. Če se sporočilo ponovno prikaže, lahko postopek v prihodnosti ponovite z drugo tipko.