Anleitung zum Zurücksetzen von Servicefehlern bei Epson- und Canon-Tintenpatronen für E11, „Service erforderlich“ und 5B00

Epson EcoTank L3158 Waste Ink Counter Reset

Epson L3158 Reset – Fix Service Required, E11, E10, E12 & E91

If your Epson L3158 shows Service Required, Fehler E11, E10, E12, E91 or an ink pad warning, the printer usually needs a waste ink counter reset.

Problem

Epson L3158 stopped printing and shows a service or ink pad message.

Lösung

Reset the waste ink counter with WicReset Connect.

Needed

Windows PC, USB cable, WicReset Connect and reset key.

Die Epson L3158 reset is used when the printer reaches the internal waste ink counter limit. This is a common situation on Epson EcoTank printers after many cleaning cycles, ink charging operations or long-term use.

When the counter is full, the printer may refuse to print even if the ink tanks are full. The display or computer may show Service Required, The waste ink pad is full. Contact Epson support, The printer's ink pads are nearing the end of their service life oder Ink Pad Reset Required.

Epson L3158 messages fixed by waste ink counter reset

This guide is for Epson L3158 users who see one of these warnings:

  • Epson L3158 Service Required
  • Epson L3158 Error E11
  • Epson L3158 Error E10
  • Epson L3158 Error E12
  • Epson L3158 Error E91
  • Parts inside your printer are near the end of their service life
  • The waste ink pad is full. Contact Epson support
  • The printer's ink pads are nearing the end of their service life
  • Maintenance Box Full
  • Ink Pad Reset Required
Direct answer: If your Epson L3158 shows one of these messages, reset the Restfarbenzähler mit WicReset Verbinden.

What does Epson L3158 Service Required mean?

Service Required usually means the printer has reached its internal maintenance limit. Epson printers count waste ink generated during cleaning and maintenance. When the counter reaches the limit, the printer blocks printing to prevent possible ink overflow.

This warning is not removed by adding more ink. It is also not fixed by reinstalling printer drivers. The printer needs an Epson L3158 waste ink counter reset.

How to reset Epson L3158 waste ink counter

You can reset Epson L3158 at home. Follow these steps:

  1. Download and install WicReset Verbinden on a Windows computer.
  2. Connect your Epson L3158 directly by USB cable.
  3. Open the program and select your detected Epson printer.
  4. Enter your valid WicReset Connect reset key.
  5. Start the waste ink counter reset.
  6. Wait until the reset process is completed.
  7. Turn the printer off for about 10 seconds.
  8. Turn it back on and check if the warning disappeared.

After the restart, the Epson L3158 should return to normal operation if the problem was caused by the waste ink counter.

Connection tip: Use a direct USB connection. Do not use a USB hub. If the printer is not detected, try another USB port, another cable, or restart the printer and computer.

Why use WicReset Connect for Epson L3158?

Made for waste ink reset

WicReset Connect is used to reset the internal waste ink counter in supported Epson printers.

Quick home solution

No need to visit a service center when the printer only needs a counter reset.

Works by USB

Connect the printer to a Windows computer and perform the reset in a few minutes.

Useful links for Epson L3158 reset

Epson L3158 and L3150 series reset

The Epson L3158 belongs to the Epson L3150 EcoTank family. Many users searching for related models have the same waste ink counter problem.

Epson L3150 reset
Epson L3151 reset
Epson L3152 reset
Epson L3153 reset
Epson L3156 reset
Epson L3158 reset

This helps with searches like Epson L3158 resetter, Epson L3158 Service Required fix, Epson L3158 E11, Epson L3158 ink pad reset und Epson L3158 waste ink counter reset.

Common Epson L3158 reset keywords

Epson L3158 reset, Epson L3158 resetter, Epson L3158 Service Required, Epson L3158 Error E11, Epson L3158 Error E10, Epson L3158 Error E12, Epson L3158 Error E91, Epson L3158 waste ink counter reset, Epson L3158 ink pad reset, Epson L3158 waste ink pad full, Epson L3158 Maintenance Box Full, Epson L3158 Ink Pad Reset Required, Epson L3158 parts inside your printer are near the end of their service life, reset Epson L3158 printer, Epson EcoTank L3158 reset key, how to fix Epson L3158 Service Required.

When Epson L3158 reset may not be enough

WicReset Connect resets the waste ink counter. It does not repair broken parts, damaged sensors, paper feed problems, printhead damage or electronic faults. If your Epson L3158 has another hardware issue, that problem must be checked separately.

But if the problem is Service Required, Fehler E11, waste ink pad full, Maintenance Box Full oder Ink Pad Reset Required, resetting the waste ink counter is the correct fix.

Need Epson L3158 reset key?

Verwendung WicReset Verbinden to reset your Epson L3158 waste ink counter and remove Service Required, E11, E10, E12, E91 and ink pad full messages.

Buy Reset Key Now

FAQ – Epson L3158 Reset

How do I fix Epson L3158 Service Required?

Reset the Epson L3158 waste ink counter with WicReset Connect, then turn the printer off for about 10 seconds and turn it on again.

What does Epson L3158 Error E11 mean?

Error E11 is commonly connected with the waste ink pad or internal maintenance counter. The usual solution is a waste ink counter reset.

Can WicReset Connect clear E10, E12 or E91?

If E10, E12 or E91 appears because of the waste ink counter or ink pad service life warning, WicReset Connect can reset the counter.

What does “Ink Pad Reset Required” mean on Epson L3158?

It means the printer needs the internal waste ink counter to be reset before normal printing can continue.

Can I reset Epson L3158 at home?

Yes. You can reset Epson L3158 at home using a Windows computer, USB cable, WicReset Connect and a valid reset key.

Do I need to replace ink bottles before reset?

No. Ink bottles are not the cause of the waste ink counter warning. The counter must be reset.

Does this guide also match Epson L3150 series?

Yes. This page is focused on Epson L3158, but it also references the Epson L3150 series, including L3150, L3151, L3152, L3153 and L3156.

Was Sie brauchen

  • WicReset Connect-Taste (nur etwa 6 € - die billigste Option)
  • Windows-PC
  • USB-Kabel

Erforderliche Zeit

Etwa 2 Minuten

Schwierigkeitsgrad

Sehr leicht

Funktioniert bei Fehlern

  • Epson: E10, E11, E12, E91 und ähnliche Servicefehler
  • Kanone: 1700, 5800 und ähnliche Tintenabfälle / Supportcode-Fehler
  • Meldungen wie “Abfalltintenzähler voll”, “Tintenkissen am Ende seiner Lebensdauer”

Unterstützte Druckerserien

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-Serie, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF und viele andere beliebte Serien.


Epson Tintenkissen Service zurücksetzen

Wenn Ihr Epson Meldungen anzeigt wie “Das Stempelkissen ist am Ende seiner Lebensdauer”, “Stempelkissen-Service erforderlich” oder “Abfall-Farbkissen voll”, können Sie den Epson-Tintenkissen-Service zurücksetzen mit einem WicReset Connect Schlüssel. Das Programm setzt den internen Tintenverbrauchszähler zurück, so dass der Drucker wieder funktioniert, ohne dass ein Service-Center aufgesucht werden muss.

  • Behebt die Warnungen “Epson Tintenkissen-Service” / “Service erforderlich” in wenigen Minuten.
  • Arbeitet als Epson Tintenkissen Service zurücksetzen Lösung für die meisten EcoTank-, L-Serien-, ET-Serien-, XP-, WF- und Stylus-Drucker.
  • Kein Hardware-Resetter erforderlich - nur ein Windows-PC, ein USB-Kabel und WicReset Connect.

FAQ (kurz)

F: Muss ich das physische Stempelkissen ersetzen?
A: In den meisten Fällen zu Hause und im Büro setzen Sie mit WicReset Connect nur den Zähler für verbrauchte Tinte zurück und verwenden den Drucker normal weiter.

F: Ist dies eine einmalige Rückstellung?
A: Jede Taste setzt den Zähler einmal zurück. Sie können den Vorgang in Zukunft mit einer anderen Taste wiederholen, wenn die Meldung erneut erscheint.

Wählen Sie Ihre Währung aus
×

Warenkorb