Epson Waste Ink Counter Reset – Fix E11 and Ink Pad Errors

Reset Epson waste ink counter and fix E11, Service Required and ink pad errors. Download WicReset Connect free, buy reset key from 6 EUR.

Buy reset key from 6 EUR Download WicReset Connect free

Epson waste ink counter reset for E11, Service Required and ink pad warnings

When the Epson waste ink counter reaches its limit, the printer may stop printing and show E11, Service Required, Ink Pad Reset Required or a similar maintenance warning.

Important: WicReset Connect performs the reset. WIC Reset Utility can be used only to read waste ink counters or check communication with the printer.

When this page can help

Waste ink counter full
E11 or Service Required
Ink Pad Reset Required
Printer refuses to print
Counter reading is high in WIC Reset Utility
Reset key required to continue printing

How to reset the Epson waste ink counter

Download WicReset Connect for free.
Connect the Epson printer directly to a Windows computer using a USB cable.
Open WicReset Connect and select the detected printer.
Buy a WicReset Connect reset key from 6 EUR.
Enter the reset key in WicReset Connect and start the reset.
After the reset, turn the printer off for about 10 seconds and turn it on again.

Important details before reset

What is the Epson waste ink counter?

It is an internal maintenance counter used by the printer to track estimated waste ink generated by cleaning and printing operations.

Reset process

The reset is done with WicReset Connect. Download the program, connect the printer by USB, enter a valid reset key and run the reset.

After the reset

After a successful reset, turn the printer off for about 10 seconds and turn it on again. The warning should be cleared if there are no other printer errors.

Download WicReset Connect and buy the reset key

WicReset Connect is free to download. To perform the actual reset, buy a WicReset Connect reset key from 6 EUR.

Buy WicReset Connect reset key Download WicReset Connect

Useful links

Use these links to buy the reset key, download the program, open the Epson video manual, read counters or check if your printer is supported.

Buy WicReset Connect reset key Download WicReset Connect Video instructions for Epson reset Read counters with WIC Reset Utility Check supported printer model

FAQ – Epson waste ink counter reset

What program resets the Epson waste ink counter?

WicReset Connect performs the reset with a valid reset key.

What is WIC Reset Utility for?

WIC Reset Utility can read waste ink counters or check printer communication. It is not the reset program used here.

Does the key expire?

The WicReset Connect reset key is intended for one reset and has no normal time-expiration limit.

Can the reset be done by USB?

Yes. USB is recommended and should be used instead of Wi-Fi.

Solucionar el error “La almohadilla de tinta necesita servicio” - Modelos Epson compatibles

Lo que necesita

Tecla WicReset Connect (sólo unos 6 euros - la opción más barata)
PC con Windows
Cable USB

Tiempo necesario

Alrededor de 2 minutos

Dificultad

Muy fácil

Funciona en caso de error

Epson: E10, E11, E12, E91 y errores de servicio similares
Canon: 1700, 5800 y similares tinta residual / errores de código de soporte
Mensajes como “Contador de tinta residual lleno”, “Tampón de tinta al final de su vida útil”

Series de impresoras compatibles

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, serie L, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF y muchas otras series populares.

Restablecer el servicio de almohadillas de tinta Epson

Si tu Epson muestra mensajes como “La almohadilla de tinta está al final de su vida útil”, “Se requiere servicio de almohadilla de tinta” o “Bloc de tinta lleno”, puede restablecer el servicio de almohadillas de tinta Epson mediante una tecla WicReset Connect. El programa restablece el contador interno de tinta residual, por lo que la impresora vuelve a funcionar sin necesidad de acudir a un centro de servicio.

Corrige en pocos minutos los avisos “Epson ink pad service” / “Service required”.
Funciona como restablecer el servicio de almohadillas de tinta Epson solución para la mayoría de impresoras EcoTank, serie L, serie ET, XP, WF y Stylus.
No se necesita un reseteador de hardware: sólo un PC con Windows, un cable USB y WicReset Connect.

FAQ (corto)

P: ¿Es necesario sustituir la almohadilla de tinta física?
R: En la mayoría de los casos domésticos y de oficina, basta con restablecer el contador de tinta residual con WicReset Connect y seguir utilizando la impresora con normalidad.

P: ¿Se trata de un reinicio único?
R: Cada tecla reinicia el contador una vez. Puede repetir el procedimiento en el futuro con otra tecla si el mensaje aparece de nuevo.