Epson L3201 Reset – Clear Error E11 / “Service Required” Fast
Fix blocked printing with WicReset Conectar. Works on Windows 7–11 via USB.
If your Epson L3201 printer refuses to print and shows Error E11 o “Service required”, the problem is the contador de tinta usada. Once this counter reaches its limit, the printer locks itself. Luckily, you can reset it in just a few minutes using WicReset Conectar.
What happens when Epson L3201 shows Error E11
- Error message: “Service required”.
- Error code E11 during printing.
- Flashing red lights and blocked printing.
Why this error appears
The printer monitors waste ink through an internal contador de tinta usada. When it reaches 100%, the machine disables printing. Resetting the counter with WicReset Conectar removes the error instantly.
How to reset Epson L3201
- Download WicReset Conectar.
- Connect Epson L3201 to your PC via Cable USB (Wi-Fi reset is not supported).
- Open the program, enter your purchased tecla reset and press RESET.
- Wait around 2 minutes for the process to finish.
- Turn the printer OFF for 10 seconds, then power it ON again.
👉 Need a reset key? Buy WicReset Connect key here
FAQ – Epson L3201 Reset
Does WicReset Connect remove Error E11?
✅ Yes, the reset clears the waste ink counter and unlocks printing.
Do the pads need replacing?
❌ Usually not. The counter is an estimate — after reset, the printer works normally.
Do I need Wi-Fi for reset?
No — USB only. Wi-Fi reset is not possible.
Which Windows versions are supported?
Works on Windows 7, 8, 10 and 11.
Tips to avoid Epson L3201 lock error
- Reset the counter at ~95% before it reaches 100%.
- Use a high-quality USB cable during reset.
- Avoid unnecessary head cleanings to reduce waste ink usage.
English 
Čeština 
Deutsch 
Ελληνικά 
Español 
Français 
Hrvatski 
Magyar 
Italiano 
Nederlands 
Português 
Slovenščina 
Українська