Canon MG3570 waste ink counter reset — WICRESETPRO
Canon / step-by-step guide
Canon MG3570
How to enter service mode
Click the image: play / pause
Turn off the printer.
Press POWER and wait for the printer to turn off. Leave the power cable and USB cable connected.
At your own pace. Pause the animation at any time. You can also select a step on the bar below or use the arrows.
Space: play / pause · ← →: change step
Complete step-by-step instructions
- Turn off the printer.
Press POWER and wait for the printer to turn off. Leave the power cable and USB cable connected. - Hold STOP.
Press and hold STOP. Keep holding it throughout the next step. - Also hold POWER.
While holding STOP, press and hold POWER. Wait for the indicator light to come on. - Release STOP. Hold POWER.
Release only STOP. Keep POWER held down. - Press STOP 6 times.
Keep holding POWER. Press and release STOP exactly 6 times. One press means pressing and then releasing the button. - Release POWER.
Release POWER. Wait for the printer to finish starting up, then check the connection in the program.
Canon MG3570 is supported for waste ink counter reset in WICRESETPRO. Use a USB connection and the preparation instructions for this exact model in the app.
Canon MG3570 error 5B00? Reset the waste ink counter using WICRESETPRO and resume printing immediately.
- Enter service mode on Canon MG3570
- Download & install WICRESETPRO
- Connect your printer via USB
- Reset takes about a minute once the printer is prepared
Service-mode preparation for Canon MG3570
Follow the full model-specific procedure above, including preparation and any explicitly assigned alternative. Read the complete service-mode instructions above. This documentation status does not change confirmed reset support.
How to Reset Waste Ink Counter on Canon MG3570 – Step-by-Step
Click the button below to download WICRESETPRO for Canon printers:
- Ensure Canon MG3570 is in service mode.
- Connect to your PC using a USB cable.
- Canon service procedures in WICRESETPRO use a USB cable. Wi-Fi for normal printing does not replace this service connection.
- Open WICRESETPRO as Administrator.
- Buy a reset key using the button below.
- Enter the key in the program.
- Click RESET to start the operation.
The reset takes about a minute once the printer is prepared.
- Wait until the program confirms completion.
- Turn the printer off as requested by the procedure.
- Turn it back on when instructed, then read the counters and check the printer message. Investigate any remaining fault before repeating the operation.
Canon MG3570 Error Codes Explained
- 5B00 – waste ink absorber full
- 1700 – ink absorber almost full
- 5B02 — service error; confirm its meaning and required action in the manual for this model.
These are common Canon code examples. Check their meaning in the manual for Canon MG3570; a warning may indicate an approaching limit, while a service error can have a different cause. A counter reading does not confirm the physical condition of the absorber.
If the exact profile offers the required reset, the operation can take about a minute after preparation. Keep USB and power stable and verify the final counter reading.
Reset Your Canon MG3570 Now
Resetting the waste ink counter on your Canon MG3570 takes only a moment — start the process now.
Prepare Canon MG3570
Choose the application version for the documented operation on Canon MG3570. Do not infer the availability of every service tool from the existence of a platform download.
WICRESETPRO · Windows 7 / 8 / 8.1
The Canon module uses USB. Follow the service-mode procedure shown for the exact model and firmware in the app. Do not substitute a button sequence from a nearby model.
Keep internet access available for model data and operation approval. Clear pending print jobs and keep the printer’s power and data connection stable. Available in 60 interface languages.
Download WICRESETPRO
Windows
Windows 10 / 11 · x64Download for free · Windows ↓WICRESETPRO · Windows 7 / 8 / 8.1
Coming soonWindows 7 / 8 / 8.1macOS
macOS 14+ · Intel & Apple SiliconCanon — Instructions
Put your Canon printer into service mode by following the program's instructions for your model.
Service mode
Put your Canon printer into service mode by following the program's instructions for your model.
Instructions
Open WICRESETPRO and connect your Canon printer using a USB cable.
Service mode
Put your Canon printer into service mode by following the program's instructions for your model.
Read counters
Select your printer and read the waste ink counters. Wait for the percentages to appear.
Reset key
Copy your complete 12-character key from the TXT attachment and paste it into the program's key field.
Reset
Click Reset. Wait for the success message and 0% readings. Do not turn off the printer or disconnect USB during the reset.
Restart
After a successful reset, turn the printer off using its power button. Wait 10 seconds, then turn it on again.
Need help?
Include your order number, printer model and error message. Attach a screenshot.
A1B2C3D4E5F6 is an inactive example. Use your own key.
Read, reset and verify Canon MG3570
- Use the USB connection and the model-specific service mode requested by WICRESETPRO. Wait for stable detection before continuing.
- Read the available waste ink counters in WICRESETPRO and wait for a completed result. A missing reading is not a zero reading.
- Waste ink counter reset is supported for this model. Select that operation and follow its preparation instructions in the app.
- For a supported full reset, enter your valid Pro reset key and start the operation. Keep the connection stable until the app reports the result.
- Restart only when instructed, then read the counters again in Pro to verify the outcome.
Once a supported printer is connected and ready, the reset itself can take about a minute. Installation and preparation can take longer.
Resetting a counter does not replace physical absorber maintenance.
Your reset key
Unused keys do not expire. After the first reset, you can reuse the key on the same printer for 24 hours. Unused units in a Multi-Key pool do not all expire when that printer’s reuse period ends.
Choose one Multi-Key with the purchased pool or the corresponding number of separate codes. Check the current product, price and currency in the store.
For the wider application feature set, see printer diagnostics and maintenance in WICRESETPRO. Functions shown there are model-dependent.
Questions and answers
What is a waste ink counter?
It’s an internal counter that tracks how much waste ink was collected.
Why does the Canon MG3570 stop printing?
When the counter reaches the limit, the printer locks for safety.
Do I need any special cables?
Just a standard USB cable is required.
Can I damage the printer during reset?
The electronic reset does not clean or replace the absorber. Inspect it and service saturated pads, leaks or damaged parts before continuing to print.
Do I need to reinstall drivers?
Typically no, Windows detects the printer automatically.
A LITTLE HELP. BACK TO PRINTING.
Need help? We’re here 24/7.
Contact our team by email or WhatsApp. Please include your order number and printer model so we can help you quickly.
Just exploring? You’re welcome to ask before ordering.