Restore Epson EP-807A in Minutes – Waste Ink Counter Reset Tutorial
To clear Service required on Epson EP-807A, reset the waste ink counter using WicReset Connect. About 2 minutes, USB, Windows 7–11. Keys from 6 EUR.
Common Symptoms – Epson EP-807A
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson EP-807A stops
When the waste ink counter maxes out, Epson EP-807A shows Service required. Counter reset re-enables printing; pads might not be fully saturated yet.
Quick facts – Epson EP-807A reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson EP-807A | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson EP-807A. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson EP-807A
- Connect Epson EP-807A to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson EP-807A
Can I reset at 100% lock?
Yes — but many users reset proactively at ~95% to avoid downtime.
Will I see the counter after reset?
Yes — it should read 0% (or close) after successful reset.
Do I need to power-cycle?
Yes — turn the printer off/on after the reset completes.
Can I keep printing large jobs after reset?
Yes — monitor the counter and maintain the device as usual.
Any risks to cartridges?
No — cartridges/ink system aren’t altered by the reset.
Tips for Epson EP-807A reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson EP-807A reset instructions using WicReset Connect.