Epson EcoTank ET-1810 Resetting – Fix Service Required / Error E11
Epson EcoTank ET-1810 blocked with Error E11 / Service required? It’s usually the waste ink counter. Clear it quickly via WicReset Connect. Reset keys from 6 EUR. USB on Windows 7–11 only.
When Epson EcoTank ET-1810 Needs Reset – Symptoms
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson EcoTank ET-1810 stops
Your Epson EcoTank ET-1810 uses a waste ink counter to estimate absorbed ink. After reaching a set value, it stops printing. Resetting the counter removes the lock; actual pads may still have capacity.
Quick facts – Epson EcoTank ET-1810 reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson EcoTank ET-1810 | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson EcoTank ET-1810. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson EcoTank ET-1810
- Connect Epson EcoTank ET-1810 to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson EcoTank ET-1810
How do I prepare for reset?
Install drivers, use a quality USB cable, run as admin.
Do I need to uninstall other Epson tools?
No — just close them during the reset.
Can the reset fail on unsupported models?
Yes — always verify compatibility before purchase.
Will reset clean print heads?
No — it only affects the waste ink counter.
Can I print a test page after reset?
Yes — recommended to confirm normal operation.
Tips for Epson EcoTank ET-1810 reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson EcoTank ET-1810 reset instructions using WicReset Connect.