Fix Epson Ink Pad Needs Service & Canon Error 5B00
Epson L3271 reset – Fix Error E11 / “Service required” (Windows USB)

Epson L3271 – Reset & Clear Error E11

Reset the waste ink counter on Epson L3271 using WicReset Connect. Fully compatible with Windows 7–11 via USB. Reset keys from 6 EUR.

🔑 Buy Reset Key (from 6 EUR) ⬇️ Download WicReset Connect

Fix “Service required” on Epson L3271

When Epson L3271 shows Error E11 or “Ink pad needs service”, the waste ink counter is full. Resetting with WicReset Connect solves the problem.

Quick facts – Epson L3271 reset

ModelErrorSolutionSupported OSReset time
Epson L3271Error E11 / Service requiredWicReset ConnectWindows 7–11 (USB)~2 minutes

Symptoms

  • Printer stops printing, LEDs blinking.
  • Error messages: Error E11 or Service required.
  • Waste ink counter close to 100%.

Why does Epson L3271 show “Service required”?

This is not about real ink saturation. The printer has an internal waste ink counter. Once it hits 100%, Epson L3271 blocks itself. Resetting with WicReset Connect clears the error.

Download reset tool & driver

⬇️ Download WicReset Connect (Windows 7–11)

The official driver for the L3260 Series (includes Epson L3271) can be downloaded from Epson Setup Navi:

⬇️ Download Epson L3260 Series driver

Instructional Video – Epson L3271 reset

▶️ Watch WicReset Connect tutorial

ℹ️ Available in 10 languages with narration.

Step-by-step reset (Epson L3271)

  1. Connect Epson L3271 to your computer with a USB cable.
  2. Launch WicReset Connect and verify printer detection.
  3. Enter your purchased reset key and click Reset.
  4. Wait 2 minutes, power off for 10s, then turn Epson L3271 back on.
🔑 Buy Reset Key (from 6 EUR) ⬇️ Download WicReset Connect

FAQ – Epson L3271

Does reset clear Error E11?

✅ Yes, it restores printing.

Are pads physically full?

No, only the counter reached its limit.

Can reset be done via Wi-Fi?

❌ No, only USB.

How long will the reset last?

Until the counter fills again after thousands of prints.

More about Epson L3271 reset

  • Tip Reset around 95% usage to avoid printer lockout.
  • Avoid unnecessary head cleanings.
  • Always use a good quality USB cable.
  • Keys start from 6 EUR.
🔑 Buy Reset Key (from 6 EUR) ⬇️ Download WicReset Connect

Related Epson models

This page is dedicated to Epson L3271 reset.

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.