Epson and Canon ink pad service error reset guide for E11, Service Required and 5B00
Epson L3275 reset – Fix Error E11 / “Service required” (Windows USB)

Epson L3275 – Reset & Clear Error E11

Quick reset of the waste ink counter on Epson L3275 using WicReset Connect. Works with Windows 7–11 via USB. Reset keys start from 6 EUR.

Fix “Service required” on Epson L3275

If Epson L3275 shows Error E11 or “Ink pad needs service”, it means the waste ink counter reached 100%. Resetting with WicReset Connect restores the printer.

Quick facts – Epson L3275 reset

ModelErrorSolutionSupported OSReset time
Epson L3275Error E11 / Service requiredWicReset ConnectWindows 7–11 (USB)~2 minutes

Symptoms

  • Printer stops printing; red lights flashing.
  • Error messages: Error E11 or Service required.
  • Waste ink counter at or near 100%.

Why does Epson L3275 show “Service required”?

This is triggered by the printer’s waste ink counter, not actual ink saturation. At 100%, Epson L3275 locks itself. Resetting with WicReset Connect clears the counter.

Download reset tool & driver

The official driver for the L3260 Series (covers Epson L3275) can be downloaded via Epson Setup Navi:

⬇️ Download Epson L3260 Series driver

Instructional Video – Epson L3275 reset

▶️ Watch WicReset Connect tutorial

ℹ️ Video available in 10 languages with professional narration.

Step-by-step reset (Epson L3275)

  1. Connect Epson L3275 to your PC with a USB cable.
  2. Run WicReset Connect and ensure printer detection.
  3. Enter your purchased reset key and press Reset.
  4. Wait ~2 minutes, power off for 10s, then restart Epson L3275.

FAQ – Epson L3275

Does reset clear Error E11?

✅ Yes, printing is restored.

Are pads physically full?

No, just the counter reached 100%.

Can reset be done via Wi-Fi?

❌ No, only USB.

How long will reset last?

Until the waste ink counter fills again after thousands of prints.

More about Epson L3275 reset

  • Tip Perform reset around 95% usage.
  • Avoid unnecessary head cleaning cycles.
  • Always use a reliable USB cable.
  • Reset keys start from 6 EUR.

Related Epson models

This page is dedicated to Epson L3275 reset.

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.


Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.