Epson and Canon ink pad service error reset guide for E11, Service Required and 5B00
Epson L3278 reset – Clear Error E11 / “Service required” (Windows USB)

Epson L3278 – Reset & Clear Error E11

Reset the waste ink counter on Epson L3278 using WicReset Connect. Works on Windows 7–11 via USB. Reset keys available from 6 EUR.

🔑 Buy Reset Key ⬇️ Download WicReset Connect

Fix “Service required” on Epson L3278

When Epson L3278 shows Error E11 or “Ink pad needs service”, it means the internal counter reached its limit. Resetting removes the block.

Quick facts – Epson L3278 reset

ModelErrorSolutionOSReset time
Epson L3278Error E11 / Service requiredWicReset ConnectWindows 7–11 (USB)~2 minutes

Symptoms

  • Printer stops printing; LEDs flashing.
  • Error message: Error E11 / Service required.
  • Waste ink counter near or at 100%.

Why does Epson L3278 show “Service required”?

The message is triggered by a software counter. Once it reaches its threshold, the printer locks. Resetting with WicReset Connect clears the counter. It does *not* always mean pads are physically saturated.

Download reset tool

⬇️ Download WicReset Connect (Windows 7–11)

No verified official driver link included — to avoid wrong links.

Instructional Video – Epson L3278 reset

▶️ Watch WicReset Connect tutorial

ℹ️ Video available in 10 languages with narration.

Step-by-step reset (Epson L3278)

  1. Connect Epson L3278 to your PC via USB.
  2. Launch WicReset Connect and confirm the printer is detected.
  3. Enter your purchased reset key and click Reset.
  4. Wait ~2 minutes, turn off for 10 seconds, then power on the printer.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

FAQ – Epson L3278

Does reset clear Error E11?

✅ Yes — printing is restored.

Are ink pads full?

No — it’s usually the counter limit.

Can reset be done via Wi-Fi?

❌ No, only via USB.

How long does the reset last?

Until the counter reaches its threshold again.

More about Epson L3278 reset

  • Tip Reset at ~95% to avoid lockout.
  • Avoid unnecessary head cleaning cycles.
  • Use a good quality USB cable during reset.
  • Reset keys start at 6 EUR.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

Related Epson models

This page is dedicated to Epson L3278 reset.

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.