Fix Epson Ink Pad Needs Service & Canon Error 5B00
Epson L3279 reset – Clear Error E11 / “Service required” (Windows USB)

Epson L3279 – Reset & Clear Error E11

Reset the waste ink counter on Epson L3279 using WicReset Connect. Works with Windows 7–11 via USB. Reset keys available from 6 EUR.

🔑 Buy Reset Key ⬇️ Download WicReset Connect

Fix “Service required” on Epson L3279

If Epson L3279 displays Error E11 or “Ink pad needs service”, it means its internal waste ink counter reached the limit. Resetting will remove the block.

Quick facts – Epson L3279 reset

ModelErrorSolutionSupported OSReset time
Epson L3279Error E11 / Service requiredWicReset ConnectWindows 7–11 (USB)~2 minutes

Symptoms

  • Printer stops printing; LEDs flashing.
  • Shows Error E11 or Service required.
  • Waste ink counter at or near 100%.

Why does Epson L3279 show “Service required”?

The error comes from an internal counter, not actual pad saturation. When it reaches its threshold, Epson L3279 locks itself. Resetting with WicReset Connect clears the counter.

Download reset tool

⬇️ Download WicReset Connect (Windows 7–11)

No verified driver link included — to avoid broken or inaccurate links.

Instructional Video – Epson L3279 reset

▶️ Watch WicReset Connect tutorial

ℹ️ Available in 10 languages with narration.

Step-by-step reset (Epson L3279)

  1. Connect Epson L3279 to your PC via USB.
  2. Open WicReset Connect and verify the printer is detected.
  3. Enter your purchased reset key and click Reset.
  4. Wait ~2 minutes, power off for 10 seconds, then power on the printer again.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

FAQ – Epson L3279

Does reset clear Error E11?

✅ Yes, printing is restored.

Are pads physically full?

No, only the counter reached its threshold.

Can reset be done via Wi-Fi?

❌ No, USB connection only.

How long does the reset last?

Until the counter reaches the limit again.

More about Epson L3279 reset

  • Tip Reset around 95% usage.
  • Avoid unnecessary head cleaning cycles.
  • Use a reliable USB cable during reset.
  • Reset keys start from 6 EUR.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

Related Epson models

This page is dedicated to Epson L3279 reset.

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.