Stop ‘Service Required’ on Epson L5290 – Waste Ink Counter Reset
If Service required pops up on Epson L5290, the waste ink counter needs clearing. Use WicReset Connect + key (~2 minutes). Keys from 6 EUR. USB / Windows 7–11.
What You’ll See on Epson L5290
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson L5290 stops
A built-in waste ink counter governs service locks on Epson L5290. On limit, the printer halts. Resetting that counter typically clears the warning without requiring pad replacement.
Quick facts – Epson L5290 reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson L5290 | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson L5290. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson L5290
- Connect Epson L5290 to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson L5290
Does reset clear Error E10, E11, E12, E91 / Service required?
✅ Yes — clearing the waste ink counter removes the error and restores printing.
Must I replace ink pads after reset?
Not necessarily — the error is triggered by counters, not always by physical pad saturation.
Can I reset via Wi-Fi?
No — reset works only over USB.
How long does it take?
Usually under 2 minutes.
Do I need a key?
Yes — WicReset Connect is free, but reset requires a paid single-use key.
Tips for Epson L5290 reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson L5290 reset instructions using WicReset Connect.