Epson ME Office ME-80: How to Clear E11 / Ink Pad Needs Service (Step-by-Step)
If E11 / Service required appears on Epson ME Office ME-80, the waste ink counter needs resetting. Do it with WicReset Connect in ~2 minutes. Keys start at 6 EUR. USB + Windows 7–11.
Symptoms – Epson ME Office ME-80
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson ME Office ME-80 stops
Reaching the waste ink counter limit makes Epson ME Office ME-80 display E10, E11, E12, E91/Service required. A reset typically restores service with no hardware swap.
Quick facts – Epson ME Office ME-80 reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson ME Office ME-80 | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson ME Office ME-80. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson ME Office ME-80
- Connect Epson ME Office ME-80 to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson ME Office ME-80
What if the printer is stuck offline?
Switch USB ports, replace cable, reinstall drivers and retry.
Can I reset from a company PC?
Yes — but ensure you have admin rights and no security blocks USB.
Why key rejected?
Check typos, internet connection, and that the model is supported.
Is there a log of the reset?
WicReset can show operation status; save screenshots for support.
Do I need to disable antivirus?
Usually not; if blocked, add the app to exceptions temporarily.
Tips for Epson ME Office ME-80 reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson ME Office ME-80 reset instructions using WicReset Connect.