Solve ‘Ink Pad Needs Service’ on Epson PX-401A – WicReset Guide
A full waste ink counter causes E11 on Epson PX-401A. Reset via WicReset Connect in ~2 minutes. Keys from 6 EUR. Works on Windows 7–11 over USB.
Symptoms – Epson PX-401A
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson PX-401A stops
Your Epson PX-401A uses a waste ink counter to estimate absorbed ink. After reaching a set value, it stops printing. Resetting the counter removes the lock; actual pads may still have capacity.
Quick facts – Epson PX-401A reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson PX-401A | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson PX-401A. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson PX-401A
- Connect Epson PX-401A to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson PX-401A
Why blocked if pads aren’t full?
The counter is an estimate; it can lock before physical saturation.
Does resetting change ink levels?
No — it affects only the waste ink counter.
Can I reset over a USB hub?
Use a direct, high-quality USB cable for best stability.
Will I lose settings?
No — network/print settings remain.
Can I print immediately after reset?
Yes — power-cycle the printer and it’s ready.
Tips for Epson PX-401A reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson PX-401A reset instructions using WicReset Connect.