Stop ‘Service Required’ on Epson R290 – Waste Ink Counter Reset
Printer Epson R290 stopped with E11? Reset the waste ink counter using WicReset Connect (Windows 7–11, USB). Done in minutes. Keys from 6 EUR.
When Epson R290 Needs Reset – Symptoms
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson R290 stops
A service lock on Epson R290 is commonly tied to the waste ink counter reaching its threshold. Resetting the counter restores printing without physical maintenance in many cases.
Quick facts – Epson R290 reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson R290 | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson R290. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson R290
- Connect Epson R290 to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson R290
Can I reset at 100% lock?
Yes — but many users reset proactively at ~95% to avoid downtime.
Will I see the counter after reset?
Yes — it should read 0% (or close) after successful reset.
Do I need to power-cycle?
Yes — turn the printer off/on after the reset completes.
Can I keep printing large jobs after reset?
Yes — monitor the counter and maintain the device as usual.
Any risks to cartridges?
No — cartridges/ink system aren’t altered by the reset.
Tips for Epson R290 reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson R290 reset instructions using WicReset Connect.