Epson TX135 Waste Ink Counter Reset – Quick Fix for E11 Error
If your Epson TX135 shows Ink Pad Needs Service or Service required (E11), the waste ink counter likely hit its limit. Use WicReset Connect + key to reset in ~2 minutes. Keys from 6 EUR, Windows 7–11, USB.
Symptoms – Epson TX135
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson TX135 stops
The waste ink counter estimates ink absorbed during cleanings. When Epson TX135 hits the cap, it shows a service error and locks. Resetting the counter restores output.
Quick facts – Epson TX135 reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson TX135 | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson TX135. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson TX135
- Connect Epson TX135 to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson TX135
Does reset clear Error E10, E11, E12, E91 / Service required?
✅ Yes — clearing the waste ink counter removes the error and restores printing.
Must I replace ink pads after reset?
Not necessarily — the error is triggered by counters, not always by physical pad saturation.
Can I reset via Wi-Fi?
No — reset works only over USB.
How long does it take?
Usually under 2 minutes.
Do I need a key?
Yes — WicReset Connect is free, but reset requires a paid single-use key.
Tips for Epson TX135 reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson TX135 reset instructions using WicReset Connect.