Epson ET-1810
Epson ET-1810 Waste Ink Counter Reset with WicReset Connect
This guide is made for people who need a direct fix, not a long technical explanation. The goal is to check the counter and reset the printer safely. This page focuses on Epson E11 Error, Epson E10 Error, Epson E12 Error, Epson E91 Error, Service Required, Maintenance Box Full Epson and Ink Pad Reset Required Epson.
Use WicReset Connect to perform the reset. Use WIC Reset Utility only to read the waste ink counter and check printer communication.
Buy Reset Key Download WicReset Connect Read Waste CountersWhy this is often faster than service
If the printer is blocked only by the counter, a reset key can restore printing much faster than sending the printer to a service centre. This is useful when you need documents printed today.
Utility is only for checking
Use WIC Reset Utility only to read the waste ink counter and check communication. Use WicReset Connect for the actual reset. This avoids entering a key in the wrong place.
Why the exact model matters
Similar Epson names do not always mean the same reset function. Use the supported printer search if you are not sure about the exact printer name shown in Windows.
Messages covered on this page
Ink Pad Reset Required Epson
Direct message that usually points to the ink pad or waste ink counter limit.
Epson E11 Error
Common ink pad or waste ink counter warning.
Epson E10 Error
Service-style warning that should be checked with the counter value.
Maintenance Box Full Epson
May be related to a physical maintenance box or internal counter depending on the model.
Epson E12 Error
Maintenance message often seen when printing is blocked.
Epson E91 Error
Epson service warning where USB detection and counter reading are useful first checks.
How to reset Epson ET-1810 by USB
- Install or refresh the Epson driver if needed.
- Connect the printer by USB.
- Keep the computer online.
- Use Utility only for reading counters.
- Launch WicReset Connect.
- Wait for correct printer detection.
- Run the reset.
- Turn the printer off and on after completion.
Do not disconnect the printer while the reset is running. If detection fails, fix the USB connection before using the key again.
Why this matters for this EcoTank printer
This model is often used for home office work, daily documents and low-cost ink tank printing. When it stops with a counter warning, the problem is not only the printer but also lost time. A correct reset can be faster than replacing the printer.
USB connection matters
Do not reset through Wi-Fi, network printing or a USB hub. A direct USB cable gives the program stable communication with the printer and avoids many failed reset attempts.
Model name check
This page is prepared for Epson ET-1810. Common short name: ET-1810. If you are not sure about compatibility, use the supported printer search before buying a key.
Useful official links
FAQ – Epson ET-1810
Can I fix Epson ET-1810 E11 at home?
Yes, if E11 is caused by the waste ink counter or ink pad service limit. Use WicReset Connect, Windows and a direct USB cable.
Will new ink remove the warning?
No. Ink level and waste ink counter are different. Adding ink will not reset the counter.
What should I do after reset?
Turn the printer off for about 10 seconds, turn it on and print a test page.
Can I check the counter before buying?
Yes. Download WIC Reset Utility and use it only to read the waste ink counter.
Why is administrator mode important?
Windows permissions can block communication. Running WicReset Connect as administrator helps avoid detection problems.
Can WIC Reset Utility reset Epson ET-1810?
Use WIC Reset Utility only to read counters and check communication. Use WicReset Connect for the reset.
Why the exact model matters
Similar Epson names do not always mean the same reset function. Use the supported printer search if you are not sure about the exact printer name shown in Windows.
USB connection matters
Do not reset through Wi-Fi, network printing or a USB hub. A direct USB cable gives the program stable communication with the printer and avoids many failed reset attempts.
Reset Epson ET-1810 now
If your Epson ET-1810 is blocked by E11, E10, E12, E91, Service Required, Maintenance Box Full or Ink Pad Reset Required, start with USB detection and the official WicReset Connect download.
Buy Reset Key Download WicReset Connect Read Waste CountersFix “The Ink Pad Needs Service” Error – Supported Epson Models
What you need
- WicReset Connect key (only about €6 – the cheapest option)
- Windows PC
- USB cable
Time required
About 2 minutes
Difficulty
Very easy
Works for errors
- Epson: E10, E11, E12, E91 and similar service errors
- Canon: 1700, 5800 and similar waste ink / support code errors
- Messages like “Waste ink counter full”, “Ink pad at the end of its service life”
Supported printer series
Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.
Reset Epson ink pad service
If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.
- Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
- Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
- No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.
FAQ (short)
Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.
Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.

