Navodila za ponastavitev napak pri vzdrževanju blazinic za črnilo pri tiskalnikih Epson in Canon za napake E11, »Service Required« in 5B00

Epson ET-1810

Epson ET-1810 Waste Ink Counter Reset with WicReset Connect

This guide is made for people who need a direct fix, not a long technical explanation. The goal is to check the counter and reset the printer safely. This page focuses on Epson E11 Error, Epson E10 Error, Epson E12 Error, Epson E91 Error, Service Required, Maintenance Box Full Epson and Ink Pad Reset Required Epson.

Use WicReset Connect to perform the reset. Use WIC Reset Utility only to read the waste ink counter and check printer communication.

Nakup ključa za ponastavitev Download WicReset Connect Read Waste Counters

Why this is often faster than service

If the printer is blocked only by the counter, a reset key can restore printing much faster than sending the printer to a service centre. This is useful when you need documents printed today.

Utility is only for checking

Use WIC Reset Utility only to read the waste ink counter and check communication. Use WicReset Connect for the actual reset. This avoids entering a key in the wrong place.

Why the exact model matters

Similar Epson names do not always mean the same reset function. Use the supported printer search if you are not sure about the exact printer name shown in Windows.

Messages covered on this page

Ink Pad Reset Required Epson

Direct message that usually points to the ink pad or waste ink counter limit.

Epson E11 Error

Common ink pad or waste ink counter warning.

Epson E10 Error

Service-style warning that should be checked with the counter value.

Maintenance Box Full Epson

May be related to a physical maintenance box or internal counter depending on the model.

Epson E12 Error

Maintenance message often seen when printing is blocked.

Epson E91 Error

Epson service warning where USB detection and counter reading are useful first checks.

How to reset Epson ET-1810 by USB

  1. Install or refresh the Epson driver if needed.
  2. Connect the printer by USB.
  3. Keep the computer online.
  4. Use Utility only for reading counters.
  5. Launch WicReset Connect.
  6. Wait for correct printer detection.
  7. Run the reset.
  8. Turn the printer off and on after completion.

Do not disconnect the printer while the reset is running. If detection fails, fix the USB connection before using the key again.

Why this matters for this EcoTank printer

This model is often used for home office work, daily documents and low-cost ink tank printing. When it stops with a counter warning, the problem is not only the printer but also lost time. A correct reset can be faster than replacing the printer.

USB connection matters

Do not reset through Wi-Fi, network printing or a USB hub. A direct USB cable gives the program stable communication with the printer and avoids many failed reset attempts.

Model name check

This page is prepared for Epson ET-1810. Common short name: ET-1810. If you are not sure about compatibility, use the supported printer search before buying a key.

Useful official links

FAQ – Epson ET-1810

Can I fix Epson ET-1810 E11 at home?

Yes, if E11 is caused by the waste ink counter or ink pad service limit. Use WicReset Connect, Windows and a direct USB cable.

Will new ink remove the warning?

No. Ink level and waste ink counter are different. Adding ink will not reset the counter.

What should I do after reset?

Turn the printer off for about 10 seconds, turn it on and print a test page.

Can I check the counter before buying?

Yes. Download WIC Reset Utility and use it only to read the waste ink counter.

Why is administrator mode important?

Windows permissions can block communication. Running WicReset Connect as administrator helps avoid detection problems.

Can WIC Reset Utility reset Epson ET-1810?

Use WIC Reset Utility only to read counters and check communication. Use WicReset Connect for the reset.

Why the exact model matters

Similar Epson names do not always mean the same reset function. Use the supported printer search if you are not sure about the exact printer name shown in Windows.

USB connection matters

Do not reset through Wi-Fi, network printing or a USB hub. A direct USB cable gives the program stable communication with the printer and avoids many failed reset attempts.

Reset Epson ET-1810 now

If your Epson ET-1810 is blocked by E11, E10, E12, E91, Service Required, Maintenance Box Full or Ink Pad Reset Required, start with USB detection and the official WicReset Connect download.

Nakup ključa za ponastavitev Download WicReset Connect Read Waste Counters

Odpravite napako “Podloga za črnilo potrebuje servis” - podprti modeli Epson

Kaj potrebujete

  • WicReset Priključite tipko (samo približno 6 € - najcenejša možnost)
  • Računalnik z operacijskim sistemom Windows
  • Kabel USB

Potreben čas

Približno 2 minuti

Težavnost

Zelo enostavno

Deluje za napake

  • Epson: E10, E11, E12, E91 in podobne servisne napake
  • Canon: 1700, 5800 in podobne napake pri uporabi odpadnega črnila / podporne kode
  • Sporočila, kot so “Poln števec odpadnega črnila”, “Blazinica za črnilo je na koncu življenjske dobe”.”

Podprte serije tiskalnikov

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, serija L, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF in številne druge priljubljene serije.

Ponastavitev servisa črnilne blazinice Epson

Če vaš Epson prikazuje sporočila, kot so “Blazinica za črnilo je na koncu življenjske dobe”, “Potrebna je storitev črnilne blazinice” ali “Polna blazinica za odpadno črnilo”, lahko ponastavitev servisne storitve Epsonove črnilne blazinice s ključem WicReset Connect. Program ponastavi notranji števec odpadnega črnila, tako da tiskalnik spet deluje brez obiska servisnega centra.

  • V nekaj minutah odpravi opozorila “Epson ink pad service” / “Service required”.
  • Deluje kot ponastavitev servisa črnilne blazinice Epson rešitev za večino tiskalnikov EcoTank, L-series, ET-series, XP, WF in Stylus.
  • Ponastavitev strojne opreme ni potrebna - samo računalnik z operacijskim sistemom Windows, kabel USB in program WicReset Connect.

Pogosta vprašanja in odgovori (kratek film)

V: Ali moram zamenjati fizično blazinico za črnilo?
O: V večini domačih in pisarniških primerov lahko s programom WicReset Connect samo ponastavite števec odpadnega črnila in tiskalnik še naprej normalno uporabljate.

V: Ali gre za enkratno ponastavitev?
O: Vsaka tipka enkrat ponastavi števec. Če se sporočilo ponovno prikaže, lahko postopek v prihodnosti ponovite z drugo tipko.

Tags: , , , , ,