Fix Epson Ink Pad Needs Service & Canon Error 5B00
Reset Epson K300 in 2 Minutes – Remove Error E11 & Service Required

Reset Epson K300 in 2 Minutes – Remove Error E11 & Service Required

Got Ink Pad Needs Service on Epson K300? The waste ink counter reached its threshold. Reset via WicReset Connect with a key (from 6 EUR). Takes ~2 minutes over USB on Windows 7–11.

🔑 Buy Reset Key ⬇️ Download WicReset Connect

Common Symptoms – Epson K300

  • Printer refuses to print, LEDs flashing.
  • Shows Error E11 or Service required.
  • Displays warning: Ink Pad Needs Service.

Why Epson K300 stops

The service message on Epson K300 is usually software-based: the waste ink counter. Resetting that counter clears the alert and unlocks the printer.

Quick facts – Epson K300 reset

ModelErrorSolutionOSReset time
Epson K300Error E11 / Ink Pad Needs ServiceWicReset ConnectWindows 7–11 (USB only)~2 minutes

Download reset tool & driver

⬇️ Download WicReset Connect

No verified official Epson driver found for Epson K300. Please refer to Epson Setup Navi for compatible software.

Video tutorial

▶ Watch WicReset tutorial

Available in many languages with narration.

Reset steps for Epson K300

  1. Connect Epson K300 to your PC via USB cable.
  2. Launch WicReset Connect and ensure the printer is detected.
  3. Buy a reset key, input it, and click Reset.
  4. Wait ~2 minutes, then turn the printer off and on again.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

FAQ – Epson K300

Can I reset at 100% lock?

Yes — but many users reset proactively at ~95% to avoid downtime.

Will I see the counter after reset?

Yes — it should read 0% (or close) after successful reset.

Do I need to power-cycle?

Yes — turn the printer off/on after the reset completes.

Can I keep printing large jobs after reset?

Yes — monitor the counter and maintain the device as usual.

Any risks to cartridges?

No — cartridges/ink system aren’t altered by the reset.

Tips for Epson K300 reset

  • Reset around ~95% to avoid full lock.
  • Reduce unnecessary head cleanings.
  • Use a short, high-quality USB cable for stability.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

This page is dedicated to Epson K300 reset instructions using WicReset Connect.

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.