How to reset Canon MG7150 printer – waste ink counter reset (5B00 / 1700 / 5B02)
Canon MG7150 uses a waste ink counter that disables the printer at a programmed limit, triggering errors like 5B00, 5B02 and 1700. With WICReset Connect, you can reset this counter safely via USB.
- Enter service mode on Canon MG7150
- Download & install WICReset Connect
- Connect your printer via USB
- Reset takes about 2 minutes
How to Enter Service Mode on Canon MG7150
Follow this exact sequence:
- Schakel de Canon-printer uit.
- Press and hold the RESET button on your Canon printer.
- Press and hold the printer’s POWER button (wait a moment for the printer to turn on).
- Release the RESET button but continue to hold the POWER button.
- While holding the POWER button, press and release the RESET button 6 times.
- After pressing and releasing the RESET button the specified number of times, wait a moment before releasing the POWER button.
How to Reset Waste Ink Counter on Canon MG7150 – Step-by-Step
Click the button below to download WICReset Connect for Canon printers:
- Ensure Canon MG7150 is in service mode.
- Connect to your PC using a USB-kabel.
- Wi-Fi is not supported for resetting.
- Open WICReset Connect as Administrator.
- Buy a reset key using the button below.
- Enter the key in the program.
- Click RESET to start the operation.
The reset takes about 2 minutes.
- Wait until the program confirms completion.
- Turn the printer off for 10 seconds.
- Turn it back on — errors should disappear.
Canon MG7150 Error Codes Explained
- 5B00 – waste ink absorber full
- 1700 – ink absorber almost full
- 5B02 – ink absorber full (reset required)
These errors do not mean your Canon MG7150 is damaged. It only means the internal teller inktafval reached 100% and must be reset.
WICReset Connect resets the counter safely in about 2 minutes.
Video Instructions – Canon Reset Tutorial
Watch the official Canon reset tutorial with voice-over and step-by-step explanation:
Available in 10 talen. Follow the video for a fast, safe reset.
FAQ – Canon MG7150 Reset
It’s an internal counter that tracks how much waste ink was collected.
When the counter reaches the limit, the printer locks for safety.
Just a standard USB cable is required.
No, the reset is software-based and safe.
Typically no, Windows detects the printer automatically.
Reset Your Canon MG7150 Now
Bring your Canon MG7150 back to full working order by resetting the waste ink counter safely at home.
English 
Čeština 
Deutsch 
Ελληνικά 
Español 
Français 
Hrvatski 
Magyar 
Italiano 
Nederlands 
Português 
Slovenščina 
Українська