Epson L130
Epson L130 Ink Pad Reset Required – USB Reset Guide
When Epson software shows E11, Service Required or an ink pad warning, the printer is usually asking for maintenance counter action. This page focuses on Epson E11 Error, Epson E10 Error, Epson E12 Error, Epson E91 Error, Service Required, Maintenance Box Full Epson and Ink Pad Reset Required Epson.
Use WicReset Conectar to perform the reset. Use WIC Reset Utility only to read the waste ink counter and check printer communication.
Comprar chave de reinicialização Download WicReset Connect Read Waste CountersUtility is only for checking
Use WIC Reset Utility only to read the waste ink counter and check communication. Use WicReset Conectar for the actual reset. This avoids entering a key in the wrong place.
Use WicReset Connect for the actual reset
WicReset Connect is the program used to reset the waste ink counter. Download it, connect the printer by USB, run the program as administrator and enter your reset key when the printer is detected.
Why this matters for this ink tank printer
This model is often used for regular documents, invoices, forms and repeat printing. When it stops with a counter warning, the problem is not only the printer but also lost time. A correct reset can be faster than replacing the printer.
How to reset Epson L130 by USB
- Prepare Windows 7–11 and a direct USB cable.
- Switch the printer on.
- Check the exact model name.
- Read waste counters if unsure.
- Start WicReset Connect as admin.
- Use your reset key.
- Wait for completion.
- Restart and confirm the warning is gone.
Do not disconnect the printer while the reset is running. If detection fails, fix the USB connection before using the key again.
Messages covered on this page
Epson E10 Error
Service-style warning that should be checked with the counter value.
Epson E11 Error
Common ink pad or waste ink counter warning.
Epson E91 Error
Epson service warning where USB detection and counter reading are useful first checks.
Ink Pad Reset Required Epson
Direct message that usually points to the ink pad or waste ink counter limit.
Maintenance Box Full Epson
May be related to a physical maintenance box or internal counter depending on the model.
Epson E12 Error
Maintenance message often seen when printing is blocked.
Common mistakes to avoid
The most common mistakes are using the wrong program, entering the key in the wrong place, using Wi-Fi instead of USB, not running as administrator or disconnecting the printer too early.
Model name check
This page is prepared for Epson L130. Common short name: L130. If you are not sure about compatibility, use the supported printer search before buying a key.
Why this page is written for real users
Someone searching for this model with E11, Service Required or Ink Pad Reset Required usually has a blocked printer right now. The page gives the next steps quickly and avoids generic advice.
Useful official links
FAQ – Epson L130
What does Service Required mean on Epson L130?
It often means the internal maintenance counter has reached its limit. Reading the waste counter helps confirm the cause.
What if the printer is not detected?
Try another USB port, another cable, install the Epson driver and run WicReset Connect as administrator.
Can this repair a paper jam?
No. Paper jams are separate faults. This guide is for waste ink, ink pad and service counter warnings.
What if another error remains?
Treat it separately. A counter reset does not repair cartridge, scanner or mechanical faults.
Can repair shops use this method?
Yes. The same USB workflow works well for technicians handling many supported printers.
Does the reset work by Wi-Fi?
No. Use USB only. Wi-Fi or network printing can interrupt the reset.
Common mistakes to avoid
The most common mistakes are using the wrong program, entering the key in the wrong place, using Wi-Fi instead of USB, not running as administrator or disconnecting the printer too early.
Why this page is written for real users
Someone searching for this model with E11, Service Required or Ink Pad Reset Required usually has a blocked printer right now. The page gives the next steps quickly and avoids generic advice.
Reset Epson L130 now
If your Epson L130 is blocked by E11, E10, E12, E91, Service Required, Maintenance Box Full or Ink Pad Reset Required, start with USB detection and the official WicReset Connect download.
Comprar chave de reinicialização Download WicReset Connect Read Waste Counters
English 
Čeština 
Deutsch 
Español 
Français 
Hrvatski 
Magyar 
Italiano 
Nederlands 
Português 
Slovenščina 
Українська