Uma pequena reinicialização. Muito mais impressão. Diretamente do Wic Reset Connect equipe
Service Required on Epson BX630FWD? Here’s the Fast Reset (USB, ~2 min)

Service Required on Epson BX630FWD? Here’s the Fast Reset (USB, ~2 min)

If your Epson BX630FWD shows A almofada de tinta precisa de manutenção ou Serviço necessário (E11), the contador de tinta residual likely hit its limit. Use WicReset Connect + key to reset in ~2 minutes. Keys from 6 euros, Windows 7–11, USB.

When Epson BX630FWD Needs Reset – Symptoms

  • A impressora não imprime, e os LEDs estão piscando.
  • Programas Erro E11 ou Serviço necessário.
  • Exibe o seguinte aviso: A almofada de tinta precisa de manutenção.

Why Epson BX630FWD stops

The service message on Epson BX630FWD is usually software-based: the contador de tinta residual. Resetting that counter clears the alert and unlocks the printer.

Quick facts – Epson BX630FWD reset

ModeloErroSoluçãoSOTempo de reinicialização
Epson BX630FWDErro E11 / Almofada de tinta precisa de manutençãoWicReset ConnectWindows 7–11 (somente USB)~2 minutos

Download reset tool & driver

No verified official Epson driver found for Epson BX630FWD. Please refer to Navegador de configuração da Epson para softwares compatíveis.

Tutorial em vídeo

▶ Assista ao tutorial do WicReset

Disponível em vários idiomas, com narração.

Reset steps for Epson BX630FWD

  1. Connect Epson BX630FWD to your PC via USB cable.
  2. Lançamento WicReset Connect e certifique-se de que a impressora seja reconhecida.
  3. Compre um tecla de reinicialização, digite e clique em Redefinir.
  4. Aguarde cerca de 2 minutos e, em seguida, desligue e ligue a impressora novamente.

FAQ – Epson BX630FWD

Why blocked if pads aren’t full?

The counter is an estimate; it can lock before physical saturation.

Does resetting change ink levels?

No — it affects only the waste ink counter.

Can I reset over a USB hub?

Use a direct, high-quality USB cable for best stability.

Will I lose settings?

No — network/print settings remain.

Can I print immediately after reset?

Yes — power-cycle the printer and it’s ready.

Tips for Epson BX630FWD reset

  • Reinicie por volta de ~95% para evitar o bloqueio total.
  • Reduza as limpezas desnecessárias do cabeçote.
  • Use um cabo USB curto e de alta qualidade para garantir a estabilidade.

This page is dedicated to Epson BX630FWD reset instructions using WicReset Connect.

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • Cabo USB

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.


Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” ou “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.

Deixe um comentário

×

Carrinho