O mică resetare. Mult mai multă imprimare. Direct de la Wic Reset Connect echipă
Service Required on Epson BX630FWD? Here’s the Fast Reset (USB, ~2 min)

Service Required on Epson BX630FWD? Here’s the Fast Reset (USB, ~2 min)

If your Epson BX630FWD shows Tamponul de cerneală necesită întreținere sau Serviciu necesar (E11), the contor de cerneală uzată likely hit its limit. Use WicReset Connect + key to reset in ~2 minutes. Keys from 6 EUR, Windows 7–11, USB.

When Epson BX630FWD Needs Reset – Symptoms

  • Imprimanta nu vrea să imprime, iar LED-urile clipesc.
  • Spectacole Eroare E11 sau Serviciu necesar.
  • Afișează următorul mesaj de avertizare: Tamponul de cerneală necesită întreținere.

Why Epson BX630FWD stops

The service message on Epson BX630FWD is usually software-based: the contor de cerneală uzată. Resetting that counter clears the alert and unlocks the printer.

Quick facts – Epson BX630FWD reset

ModelEroareSoluțieSistem de operareTimp de resetare
Epson BX630FWDEroare E11 / Tamponul de cerneală necesită întreținereWicReset ConnectWindows 7–11 (numai prin USB)~2 minute

Download reset tool & driver

No verified official Epson driver found for Epson BX630FWD. Please refer to Ghidul de configurare Epson pentru software compatibil.

Tutorial video

▶ Urmărește tutorialul WicReset

Disponibil în mai multe limbi, cu narare.

Reset steps for Epson BX630FWD

  1. Connect Epson BX630FWD to your PC via USB cable.
  2. Lansare WicReset Connect și asigurați-vă că imprimanta este detectată.
  3. Cumpără un tasta de resetare, introduceți-l și faceți clic pe Resetare.
  4. Așteptați aproximativ 2 minute, apoi opriți și porniți din nou imprimanta.

FAQ – Epson BX630FWD

Why blocked if pads aren’t full?

The counter is an estimate; it can lock before physical saturation.

Does resetting change ink levels?

No — it affects only the waste ink counter.

Can I reset over a USB hub?

Use a direct, high-quality USB cable for best stability.

Will I lose settings?

No — network/print settings remain.

Can I print immediately after reset?

Yes — power-cycle the printer and it’s ready.

Tips for Epson BX630FWD reset

  • Reset around ~95% to avoid full lock.
  • Reduce unnecessary head cleanings.
  • Use a short, high-quality USB cable for stability.

This page is dedicated to Epson BX630FWD reset instructions using WicReset Connect.

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • Cablu USB

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.


Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” sau “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.

Lasă un răspuns

×

Cart