Epson EcoTank ET-2710 Reset – Fix Service Required / Error E11

Why Epson EcoTank ET-2710 stops printing

Spletna stran Epson EcoTank ET-2710 tracks maintenance operations inside the printer. During cleaning cycles, some ink is collected in the waste ink system. When the internal števec odpadnega črnila reaches its limit, the printer blocks further printing and shows a service message.

This is why users search for: Epson ET-2710 reset, Epson ET-2710 waste ink counter reset, Epson ET-2710 Service Required, Epson ET-2710 Error E11, Epson ET-2710 printer reset, Epson ET-2710 ink pad reset, and how to reset Epson ET-2710.

How to reset Epson ET-2710 waste ink counter

The reset is quick when the printer is connected correctly and ready to communicate with the software.

1. Install WicReset Connect on your Windows computer.
2. Connect the printer directly with a Kabel USB.
3. Open the program and make sure the printer is detected.
4. Enter a valid tipka za ponastavitev.
5. Start the waste ink counter reset.
6. Wait until the process is completed.
7. Restart the printer.

After the reset, the printer should return to normal printing if the issue was caused by the waste ink counter lock.

This reset page also helps for related EcoTank models

This page is centered on Epson EcoTank ET-2710 reset, but it is also relevant if you searched for: ET-2711 reset, ET-2712 reset, ET-2713 reset, ET-2714 reset, ET-2715 reset, ET-2716 reset in . ET-2718 reset.

These printers often show the same maintenance lock problem, so the reset path is very similar across the whole family.

Useful internal links

• Buy WicReset Connect key
• Check supported printer models
• WicReset Connect Epson manual
• Video instructions

Need Epson ET-2710 reset now?

Use WicReset Connect to reset the waste ink counter and fix Service Required, Napaka E11 and ink pad related warnings for ET-2710, ET-2711, ET-2712, ET-2713, ET-2714, ET-2715, ET-2716 and ET-2718.

What users want to know before resetting ET-2710

Can Epson ET-2710 be fixed without replacing the printer?

Yes. If the printer is blocked by Service Required, Napaka E11 or the waste ink counter lock, the fix is to reset that counter with WicReset Connect.

What does the ET-2710 reset actually remove?

It removes the internal števec odpadnega črnila lock that stops the printer after the maintenance limit is reached.

Do I need Wi-Fi to reset Epson ET-2710?

No. The reset should be done with a USB connection and a Windows computer.

Is this page only for ET-2710?

No. It also covers ET-2711, ET-2712, ET-2713, ET-2714, ET-2715, ET-2716 and ET-2718 because these related models face the same kind of counter lock issue.

What should I do after the reset is finished?

Restart the printer and check if normal printing has returned. If the issue was caused by the maintenance counter, the blocking message should be gone.