Epson and Canon ink pad service error reset guide for E11, Service Required and 5B00

Epson E11 Error Reset – Fix Waste Ink Counter Lock

Fix Epson E11 error caused by the waste ink counter limit. Download WicReset Connect free, buy reset key from 6 EUR and reset by USB.

Buy reset key from 6 EUR Download WicReset Connect free

Epson E11 error, Service Required and waste ink counter lock

Epson E11 is commonly connected with the waste ink counter reaching its service limit. When this happens, the printer can stop printing and show a maintenance warning even when ink levels look normal.

Important: WicReset Connect performs the reset. WIC Reset Utility can be used only to read waste ink counters or check communication with the printer.

When this page can help

  • E11 error on the printer screen or computer
  • Service Required message
  • Printer stops printing even after restart
  • Waste ink counter limit reached
  • Ink pad warning appears after cleaning cycles
  • Reset key needed to unlock the printer

How to reset the Epson waste ink counter

  1. Download WicReset Connect for free.
  2. Connect the Epson printer directly to a Windows computer using a USB cable.
  3. Open WicReset Connect and select the detected printer.
  4. Buy a WicReset Connect reset key from 6 EUR.
  5. Enter the reset key in WicReset Connect and start the reset.
  6. After the reset, turn the printer off for about 10 seconds and turn it on again.

Important details before reset

What causes Epson E11 error?

The E11 warning is usually shown when the printer's internal waste ink counter reaches its limit. This counter estimates how much ink has been collected during cleaning and printing operations.

How WicReset Connect helps

WicReset Connect performs the waste ink counter reset by USB. The program is free to download, and the actual reset requires a WicReset Connect reset key available from 6 EUR.

Before you reset

Connect only one printer at a time, use a direct USB cable and avoid Wi-Fi or a USB hub. WIC Reset Utility may be used only to read waste ink counters or check communication before the reset.

Download WicReset Connect and buy the reset key

WicReset Connect is free to download. To perform the actual reset, buy a WicReset Connect reset key from 6 EUR.

Buy WicReset Connect reset key Download WicReset Connect

Useful links

Use these links to buy the reset key, download the program, open the Epson video manual, read counters or check if your printer is supported.

Buy WicReset Connect reset key Download WicReset Connect Video instructions for Epson reset Read counters with WIC Reset Utility Check supported printer model

FAQ – Epson E11 error reset

Can WicReset Connect fix Epson E11 error?

Yes, if the E11 warning is caused by the waste ink counter limit, WicReset Connect can reset the counter with a valid reset key.

Is WicReset Connect free to download?

Yes. WicReset Connect is free to download. A reset key is required to perform the actual reset.

Can I reset E11 through Wi-Fi?

No. Use a direct USB cable connection between the printer and a Windows computer.

What should I do after the reset?

Turn the printer off for about 10 seconds, then turn it on again and test printing.

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.

Oznake: , , , , , , , ,