Epson E11 Error Reset – Fix Waste Ink Counter Lock
Fix Epson E11 error caused by the waste ink counter limit. Download WicReset Connect free, buy reset key from 6 EUR and reset by USB.
Epson E11 error, Service Required and waste ink counter lock
Epson E11 is commonly connected with the waste ink counter reaching its service limit. When this happens, the printer can stop printing and show a maintenance warning even when ink levels look normal.
When this page can help
- E11 error on the printer screen or computer
- Service Required message
- Printer stops printing even after restart
- Waste ink counter limit reached
- Ink pad warning appears after cleaning cycles
- Reset key needed to unlock the printer
How to reset the Epson waste ink counter
- Download WicReset Connect for free.
- Connect the Epson printer directly to a Windows computer using a USB cable.
- Open WicReset Connect and select the detected printer.
- Buy a WicReset Connect reset key from 6 EUR.
- Enter the reset key in WicReset Connect and start the reset.
- After the reset, turn the printer off for about 10 seconds and turn it on again.
Important details before reset
What causes Epson E11 error?
The E11 warning is usually shown when the printer's internal waste ink counter reaches its limit. This counter estimates how much ink has been collected during cleaning and printing operations.
How WicReset Connect helps
WicReset Connect performs the waste ink counter reset by USB. The program is free to download, and the actual reset requires a WicReset Connect reset key available from 6 EUR.
Before you reset
Connect only one printer at a time, use a direct USB cable and avoid Wi-Fi or a USB hub. WIC Reset Utility may be used only to read waste ink counters or check communication before the reset.
Download WicReset Connect and buy the reset key
WicReset Connect is free to download. To perform the actual reset, buy a WicReset Connect reset key from 6 EUR.
Useful links
Use these links to buy the reset key, download the program, open the Epson video manual, read counters or check if your printer is supported.
FAQ – Epson E11 error reset
Can WicReset Connect fix Epson E11 error?
Yes, if the E11 warning is caused by the waste ink counter limit, WicReset Connect can reset the counter with a valid reset key.
Is WicReset Connect free to download?
Yes. WicReset Connect is free to download. A reset key is required to perform the actual reset.
Can I reset E11 through Wi-Fi?
No. Use a direct USB cable connection between the printer and a Windows computer.
What should I do after the reset?
Turn the printer off for about 10 seconds, then turn it on again and test printing.
English 
Čeština 
Deutsch 
Español 
Français 
Hrvatski 
Magyar 
Italiano 
Nederlands 
Português 
Slovenščina 
Українська