Reinicialização do erro Epson E11 – Resolver o bloqueio do contador de tinta residual

Fix Epson E11 error caused by the waste ink counter limit. Download WicReset Connect free, buy reset key from 6 EUR and reset by USB.

Buy reset key from 6 EUR Download WicReset Connect free

Epson E11 error, Service Required and waste ink counter lock

Epson E11 is commonly connected with the waste ink counter reaching its service limit. When this happens, the printer can stop printing and show a maintenance warning even when ink levels look normal.

Importante: WicReset Connect performs the reset. WIC Reset Utility can be used only to read waste ink counters or check communication with the printer.

When this page can help

E11 error on the printer screen or computer
Mensagem «Manutenção necessária»
Printer stops printing even after restart
Waste ink counter limit reached
Ink pad warning appears after cleaning cycles
Reset key needed to unlock the printer

How to reset the Epson waste ink counter

Download WicReset Connect for free.
Connect the Epson printer directly to a Windows computer using a USB cable.
Open WicReset Connect and select the detected printer.
Buy a WicReset Connect reset key from 6 EUR.
Enter the reset key in WicReset Connect and start the reset.
After the reset, turn the printer off for about 10 seconds and turn it on again.

Important details before reset

What causes Epson E11 error?

The E11 warning is usually shown when the printer's internal waste ink counter reaches its limit. This counter estimates how much ink has been collected during cleaning and printing operations.

How WicReset Connect helps

WicReset Connect performs the waste ink counter reset by USB. The program is free to download, and the actual reset requires a WicReset Connect reset key available from 6 EUR.

Before you reset

Connect only one printer at a time, use a direct USB cable and avoid Wi-Fi or a USB hub. WIC Reset Utility may be used only to read waste ink counters or check communication before the reset.

Download WicReset Connect and buy the reset key

WicReset Connect is free to download. To perform the actual reset, buy a WicReset Connect reset key from 6 EUR.

Buy WicReset Connect reset key Download WicReset Connect

Useful links

Use these links to buy the reset key, download the program, open the Epson video manual, read counters or check if your printer is supported.

Buy WicReset Connect reset key Download WicReset Connect Video instructions for Epson reset Read counters with WIC Reset Utility Check supported printer model

FAQ – Epson E11 error reset

Can WicReset Connect fix Epson E11 error?

Yes, if the E11 warning is caused by the waste ink counter limit, WicReset Connect can reset the counter with a valid reset key.

Is WicReset Connect free to download?

Yes. WicReset Connect is free to download. A reset key is required to perform the actual reset.

Can I reset E11 through Wi-Fi?

No. Use a direct USB cable connection between the printer and a Windows computer.

What should I do after the reset?

Turn the printer off for about 10 seconds, then turn it on again and test printing.

Corrigir o erro “A almofada de tinta precisa de manutenção” - Modelos Epson suportados

O que é necessário

Tecla WicReset Connect (apenas cerca de 6 euros - a opção mais económica)
PC com Windows
Cabo USB

Tempo necessário

Cerca de 2 minutos

Dificuldade

Muito fácil

Funciona para erros

Epson: E10, E11, E12, E91 e erros de serviço semelhantes
Canon: 1700, 5800 e similares resíduos de tinta / erros de código de suporte
Mensagens como “Contador de tinta residual cheio”, “Almofada de tinta no fim da sua vida útil”

Séries de impressoras suportadas

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, série L, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF e muitas outras séries populares.

Reiniciar o serviço de almofadas de tinta Epson

Se a Epson apresentar mensagens como “A almofada de tinta está no fim da sua vida útil”, “Serviço de almofada de tinta necessário” ou “Almofada de tinta residual cheia”, pode reiniciar o serviço de almofada de tinta Epson utilizando uma chave WicReset Connect. O programa reinicia o contador interno de resíduos de tinta, para que a impressora volte a funcionar sem ter de se deslocar a um centro de assistência.

Corrige os avisos “Epson ink pad service” / “Service required” em poucos minutos.
Funciona como reiniciar o serviço de almofadas de tinta Epson solução para a maioria das impressoras EcoTank, série L, série ET, XP, WF e Stylus.
Não é necessário um reiniciador de hardware - apenas um PC com Windows, um cabo USB e o WicReset Connect.

FAQ (curta)

P: É necessário substituir a almofada de tinta física?
R: Na maioria dos casos domésticos e de escritório, basta repor o contador de resíduos de tinta com o WicReset Connect e continuar a utilizar a impressora normalmente.

P: Trata-se de uma reposição única?
R: Cada tecla repõe o contador uma vez. Pode repetir o procedimento no futuro com outra tecla se a mensagem voltar a aparecer.