XP-7105 Reset Epson – Quick & Proven Fix for Error E11 / “Service required”
Need a XP-7105 Reset Epson? Clear Errore E11 (“Servizio richiesto”) fast with WicReset Collegare. Works on Windows 7–11 via USB. Reset key from 6 EUR.
🔑 Acquistare la chiave WicReset Connect (da 6 EUR)
If your Epson XP-7105 suddenly stops and shows Errore E11 o “Servizio richiesto”, it means the internal contatore di inchiostro di scarto reached its limit. This is a software safety lock – in most cases the pads are not physically full. The quickest solution is to perform a XP-7105 Reset Epson utilizzando WicReset Collegare. The reset clears the counter and restores printing in a couple of minutes.
Symptoms that point to XP-7105 Reset Epson
- On-screen message: “Servizio richiesto”.
- Printing stops with Errore E11.
- Flashing lights and jobs stuck in queue.
Why the XP-7105 shows “Service required”
Epson devices estimate waste ink using a contatore di inchiostro di scarto. When it hits 100%, the printer blocks operations to avoid overflow. A XP-7105 Reset Epson con WicReset Collegare resets that counter to 0%, removes Errore E11 and brings the printer back to normal. For generic troubleshooting you can also check the official Epson Support page (external resource).
How to perform XP-7105 Reset Epson (step by step)
- Connect Epson XP-7105 to your PC with a Cavo USB (reset over Wi-Fi is not supported).
- Aperto WicReset Collegare on Windows 7–11.
- Confirm the printer is detected in the app.
- Inserite il vostro WicReset Connect key (da 6 EUR) e fare clic su Reset.
- Wait ~2 minutes. Power the printer off for 10 seconds and turn it back on.
- Print a test page – Errore E11 / “Servizio richiesto” should be gone.
🔑 Ottenete subito la vostra chiave di ripristino (6 EUR)
FAQ about XP-7105 Reset Epson
Does XP-7105 Reset Epson really clear Error E11?
Yes. WicReset Collegare resets the waste ink counter and removes the error immediately.
È sicuro?
Yes. The counter is an estimate; pads are usually fine. Resetting with WicReset Connect is a safe, software-level fix.
Quanto costa?
The reset key starts from 6 EUR. Un tasto per ogni reset.
Ho bisogno di un accesso a Internet?
Only to activate the key once. The reset itself runs locally over USB.
Quali sistemi sono supportati?
Windows 7, 8, 10, 11 (32/64-bit). Reset via USB only.
Cosa succede se la stampante non viene rilevata?
Use a quality USB cable, install/update drivers, try a different USB port, then run the reset again.
Tips to avoid future XP-7105 interruptions
- Avoid excessive head cleanings (they add waste ink quickly).
- Use a stable USB cable during reset to prevent communication errors.
- Consider running XP-7105 Reset Epson around 95% instead of waiting for 100%.
- Keep Windows and printer drivers up to date.
🔑 Acquistare la chiave WicReset Connect (da 6 EUR)
Stampanti Epson correlate
Correggere l'errore “Il tampone d'inchiostro necessita di manutenzione” - Modelli Epson supportati
Cosa serve
- Tasto WicReset Connect (solo circa 6 euro - l'opzione più economica)
- PC Windows
- Cavo USB
Tempo richiesto
Circa 2 minuti
Difficoltà
Molto facile
Funziona per gli errori
- Epson: E10, E11, E12, E91 e simili errori di servizio
- Canon: 1700, 5800 e simili, errori di codice inchiostro di scarto/supporto
- Messaggi come “Contatore di inchiostro di scarto pieno”, “Tampone d'inchiostro al termine della sua vita utile”.”
Serie di stampanti supportate
Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, serie L, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF e molte altre serie popolari.
Ripristino del tampone d'inchiostro Epson
Se il vostro Epson mostra messaggi come “Il tampone d'inchiostro è al termine della sua vita utile”.”, “Necessario servizio di tampone d'inchiostro” o “Cuscinetto d'inchiostro di scarto pieno”, è possibile ripristinare il servizio del tampone d'inchiostro Epson utilizzando una chiave WicReset Connect. Il programma azzera il contatore interno dell'inchiostro di scarto, in modo che la stampante torni a funzionare senza doversi rivolgere a un centro di assistenza.
- Risolve gli avvisi “Servizio tampone d'inchiostro Epson” / “Servizio richiesto” in pochi minuti.
- Funziona come un ripristino del tampone d'inchiostro Epson per la maggior parte delle stampanti EcoTank, serie L, serie ET, XP, WF e Stylus.
- Non è necessario un resetter hardware, ma solo un PC Windows, un cavo USB e WicReset Connect.
FAQ (corto)
D: È necessario sostituire il tampone d'inchiostro fisico?
R: Nella maggior parte dei casi, a casa e in ufficio, è sufficiente azzerare il contatore dell'inchiostro esausto con WicReset Connect e continuare a utilizzare normalmente la stampante.
D: Si tratta di un reset unico?
R: Ogni tasto azzera il contatore una volta. È possibile ripetere la procedura in futuro con un altro tasto se il messaggio appare di nuovo.

