Epson L355 Reset – Fix Service Required, Error E11 and Waste Ink Counter Problems
Last updated: April 21, 2026
If your Epson L355 has stopped printing and shows Service Required, Fout E11, or a message saying that parts inside the printer are at the end of their service life, the fix is to reset the teller inktafval met WicReset aansluiten.
This page is built for users who need a fast Epson L355 reset, clear steps, and a direct path to restore printing.
Quick answer
The printer is blocked by the internal counter, not by a normal cartridge issue.
The fix is to reset the waste ink counter using WicReset Connect.
Before you start
- Use a Windows computer
- Connect the printer by USB
- Make sure the printer is detected correctly
- Use a valid WicReset Connect key
Why Epson L355 shows Service Required
De Epson L355 waste ink counter reset becomes necessary when the printer reaches its internal service limit. The printer records cleaning activity and maintenance cycles, and after enough use the counter can block printing.
This is why people search for Epson L355 reset, Epson L355 Service Required, Epson L355 Error E11, Epson L355 waste ink pad reset, en how to reset Epson L355.
Directly from the software developer
WicReset Connect is our software. That means you are buying the reset solution directly from the software developer, not from an unknown third-party source.
For users searching for a trusted Epson L355 printer reset, this can increase confidence and make the buying decision easier.
How to reset Epson L355
- Buy a valid WicReset aansluiten key.
- Connect the Epson L355 directly to a Windows PC using USB.
- Ren WicReset aansluiten and select your printer.
- Enter the key and start the Epson L355 waste ink counter reset.
- Wait for the procedure to finish correctly.
- Restart the printer and check printing again.
Common Epson L355 search intent
- Epson L355 reset
- Epson L355 Service Required fix
- Epson L355 Error E11 fix
- Epson L355 waste ink counter reset
- Epson L355 ink pad reset
- how to reset Epson L355
Why this solution is a strong fit
- Targets the actual counter lock
- Built for Service Required intent
- Matches Error E11 searches
- Simple reset flow
- Direct from the software developer
Need Epson L355 reset now?
If your Epson L355 is blocked and you want the fastest path back to printing, use WicReset aansluiten to remove the waste ink counter lock and restore printing.
Helpful internal links
Why users keep searching for this fix
A blocked Epson printer creates urgent search intent. Users usually want the exact model, the exact error, and the exact solution right away.
That is why strong phrases like Epson L355 reset, fix Epson L355 Error E11, en Epson L355 Service Required fix matter so much.
FAQ – Epson L355 Reset
Why does Epson L355 show Service Required?
In many cases, this message appears because the internal waste ink counter has reached its limit and the printer has been blocked.
How do I fix Epson L355 Error E11?
If the issue is caused by the waste ink counter lock, the fix is to reset the waste ink counter using WicReset aansluiten.
What does Epson L355 waste ink counter reset mean?
It means removing the internal service lock that blocks printing after the counter reaches its limit.
Can I reset Epson L355 at home?
Yes. If the printer communicates correctly with your Windows computer through USB, the reset can be done at home.
Do I need Wi-Fi to reset Epson L355?
No. A Windows computer en USB connection are recommended.
Why does buying directly from the software developer matter?
It increases trust and gives users a more direct solution path, because WicReset Connect is our software and the reset solution comes directly from the developer.
Will Epson L355 print normally again after the reset?
If the printer was blocked by the waste ink counter, it should return to normal printing after a successful reset.
Fix Epson L355 fast and get back to printing
Use WicReset aansluiten to fix Service Required, Fout E11, en teller inktafval lock problems on Epson L355.
Get Reset Key NowFout “Inktkussen heeft onderhoud nodig” oplossen - ondersteunde Epson-modellen
Wat je nodig hebt
- WicReset Verbindingstoets (alleen ongeveer € 6 - de goedkoopste optie)
- Windows PC
- USB-kabel
Benodigde tijd
Ongeveer 2 minuten
Moeilijkheid
Zeer gemakkelijk
Werkt voor fouten
- Epson: E10, E11, E12, E91 en soortgelijke servicefouten
- Canon: 1700, 5800 en vergelijkbare inktafval / ondersteuningscodefouten
- Berichten zoals “Inktteller vol”, “Inktkussen aan het einde van de levensduur”.”
Ondersteunde printerseries
Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-serie, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF en vele andere populaire series.
Epson inktpadservice resetten
Als uw Epson berichten weergeeft zoals “Inktkussen is aan het einde van zijn levensduur”, “Inktpadservice vereist” of “Inktkussen vol afval”, kunt u de Epson inktpadservice opnieuw instellen met een WicReset Connect-toets. Het programma stelt de interne teller voor inktafval opnieuw in, zodat de printer weer werkt zonder een bezoek aan een servicecentrum.
- Herstelt de waarschuwingen “Epson inktpadservice” / “Service vereist” in een paar minuten.
- Werkt als een Epson inktpadservice resetten oplossing voor de meeste EcoTank, L-serie, ET-serie, XP, WF en Stylus printers.
- Geen hardware resetter nodig - alleen een Windows PC, USB-kabel en WicReset Connect.
FAQ (kort)
V: Moet ik het fysieke inktkussen vervangen?
A: In de meeste gevallen thuis en op kantoor reset je alleen de teller van de inktverspilling met WicReset Connect en blijf je de printer normaal gebruiken.
V: Is dit een eenmalige reset?
A: Elke toets reset de teller eenmaal. U kunt de procedure in de toekomst herhalen met een andere toets als de melding opnieuw verschijnt.

