Epson L3238 – Reset & Remove Service required message
When Epson L3238 shows Fout E11 of Service vereist, it means the waste ink counter is full. Use WicReset aansluiten to reset it quickly on Windows 7–11 (USB only). Keys cost from 6 EUR.
Signs of Epson L3238 waste ink error
- Printing blocked, warning lights flashing.
- Foutbericht: Fout E11 / Service vereist.
- Waste ink counter close to 100 % usage.
Why does Epson L3238 display Error E11?
This happens because Epson uses an internal teller inktafval. When the counter limit is reached, the printer locks with “Service required”. Resetting clears the counter and restores printing.
Quick facts – Epson L3238 reset
| Model | Fout | Oplossing | OS | Reset tijd |
|---|---|---|---|---|
| Epson L3238 | Fout E11 / Service vereist | WicReset aansluiten | Windows 7-11 (USB) | ~2 min |
Reset tool download
No official Epson driver link verified for L3238 — driver section omitted until confirmed.
Video guide
▶ Watch reset tutorial for Epson printers
Available in 10 languages with narrator voice.
How to reset Epson L3238 (step-by-step)
- Connect Epson L3238 to PC via USB-kabel.
- Open WicReset aansluiten and check if the printer is detected.
- Voer uw gekochte resettoets en druk op Reset.
- Wait ~2 minutes, switch off for 10 seconds, then turn the printer back on.
FAQ – Epson L3238
Will reset remove Error E11?
✅ Yes, the printer unlocks and you can print again.
Are ink pads really full?
No — the error is based on a counter, not sensors.
Welke systemen worden ondersteund?
Windows 7, 8, 10, 11 via USB connection.
How often is reset needed?
Whenever the counter reaches its threshold again.
Tips for Epson L3238 users
- Tip Reset when counter is ~95% instead of waiting for full lock.
- Avoid running unnecessary head cleaning cycles.
- Use a high-quality USB cable during reset.
Verwante Epson-modellen
This page is dedicated to Epson L3238 reset.
English 
Čeština 
Deutsch 
Español 
Français 
Hrvatski 
Magyar 
Italiano 
Nederlands 
Português 
Slovenščina 
Українська