L3150 Reset Epson – Quick & Proven Fix for Error E11 / “Service required”
If your Epson L3150 stops printing and shows Fout E11 of “Service vereist”, you need a L3150 Reset Epson. Solve it in minutes with WicReset aansluiten. Works on Windows 7–11 via USB. Reset key available from 6 EUR.
🔑 Buy WicReset Connect key (from 6 EUR)
The Epson L3150 has an internal teller inktafval that estimates ink absorbed during cleaning cycles. When the counter reaches 100%, the printer locks itself to prevent overflow. Pads are usually not physically full – this is mainly a software protection. You can unlock the printer with a simple L3150 Reset Epson met WicReset aansluiten.
Symptoms that require L3150 Reset Epson
- Message on screen: “Service vereist”.
- Fout E11 appears during printing.
- Flashing lights, no printing possible.
Why Epson L3150 shows “Service required”
The L3150 uses a teller inktafval to track maintenance ink usage. Once the counter is full (100%), the printer stops all printing. Performing a L3150 Reset Epson met WicReset aansluiten restores full functionality. For general help you can also visit the official Epson Support website.
How to perform L3150 Reset Epson (step by step)
- Connect the Epson L3150 to your PC with a USB-kabel (Wi-Fi is not supported for reset).
- Open WicReset aansluiten on Windows.
- Check that your printer is detected in the program.
- Enter your resettoets (from 6 EUR) and click Reset.
- Wait about 2 minutes until the process completes.
- Turn off the printer for 10 seconds, then turn it back on. The error should be gone.
🔑 Get your reset key now (6 EUR)
FAQ about L3150 Reset Epson
Does L3150 Reset Epson remove Error E11?
Yes – WicReset aansluiten resets the counter and clears the error instantly.
Is it safe?
Absolutely. Pads are rarely full; the counter is just an estimate. Resetting is a safe, software-only fix.
How much does it cost?
A single reset key costs from 6 EUR. One key per reset.
Do I need internet access?
Only for activation of the key. The reset runs locally over USB.
Welke systemen worden ondersteund?
Windows 7, 8, 10, 11 – 32/64 bit. Reset via USB only.
What if the printer is not detected?
Try another USB cable or port, update drivers, then repeat the reset.
More about L3150 Reset Epson
Can I use L3150 Reset Epson on macOS?
No – the reset tool works only on Windows systems (Windows 7–11 via USB). If you use macOS or Linux, you will need access to a Windows PC to run the reset.
Hoe lang duurt het resetten?
The reset process usually finishes in less than 2 minutes. After restarting the printer, it is ready to print again without Error E11.
🔑 Buy WicReset Connect key (from 6 EUR)
English 
Čeština 
Deutsch 
Español 
Français 
Hrvatski 
Magyar 
Italiano 
Nederlands 
Português 
Slovenščina 
Українська