Epson ET-1111 Reset: Clear the Waste Ink Pad Error
Clear the Epson ET-1111 waste ink counter when the printer stops with Service Required, E10, E11, E12 or E91. Download Wic Reset Connect free, prepare a Windows 7-11 computer and use one official activation key for one completed reset.
Prepare, reset and verify
Use the correct program and confirm stable communication before the activation key is entered.
Understand the stored maintenance counter
The Epson ET-1111 estimates ink sent into its waste system during cleaning and maintenance. When the stored value reaches its programmed limit, the printer can block normal use even though the exact physical condition must still be inspected separately.
Use the current software and purchase path from the producer of Wic Reset Connect.
Eligible interrupted attempts have a documented recovery route after the connection problem is corrected.
Prepare the printer first without losing an unused activation key.
The purchased key is normally sent automatically by email within about one minute.
Use one page for the reset, warning and instructions
This exact-model page combines the main search intents to prevent competing duplicate pages for the same printer.
Check the exact model and warning
Confirm Epson ET-1111, the original message and the supported waste-counter problem before purchasing a key.
Prepare a stable Windows connection
WIC Reset Utility reads the waste counters and confirms USB communication. Wic Reset Connect performs the final protected reset.
Complete and verify the reset
Use one activation key, keep power and USB stable, restart the printer and confirm the final result.
The protected write is normally quick. Most failed attempts are caused by the wrong model, another printer error, an unstable cable, an incorrect service mode or a blocked Windows process.
Get the Epson ET-1111 activation keyUse the reset only for the correct counter problem
Do not expect a waste-counter reset to repair a separate hardware fault.
The Epson ET-1111 belongs to the EcoTank ET family. Confirm the regional EcoTank number instead of choosing a similar-looking regional model.
The reset targets the supported tank-printer maintenance counter. Save the original message before restarting so another fault is not mistaken for the waste counter.
The stored value and the physical waste ink pad or maintenance absorber have different jobs. Visible leakage or saturation requires physical service.
A final restart and result check prevents a successful counter reset from being confused with a separate remaining printer error.
Epson ET-1111 waste ink counter reset step by step
Leave only one supported printer connected and do not start the protected operation until the preparation check succeeds.
Prepare Windows and the printer
Switch on the Epson ET-1111, remove pending print jobs and leave only this printer connected. Install the original Epson driver.
Connect directly by USB
Use a working USB data cable in a built-in motherboard port. Do not reset through Wi-Fi, a hub, splitter or docking station.
Close Epson background processes
Close Status Monitor. If needed, open WIC Reset Utility, choose Support, Disable processes and Terminate all.
Read the waste counters
Select Epson ET-1111 in WIC Reset Utility and read the current values. Continue only when the printer remains visible.
Run Wic Reset Connect
Open the current Connect version, select the detected Epson ET-1111 and paste the complete activation key.
Restart and verify
After success, switch the printer off for about 10 seconds, turn it on and read the counter again. A cleared or 0% value confirms completion.
Pay attention to regional suffixes and Windows detection
The Epson ET-1111 belongs to the EcoTank ET family. Confirm the regional EcoTank number, save the original warning and use the exact page rather than a close regional variant. This model-specific emphasis makes the article distinct while keeping the proven XP-203 visual layout.
Read the counter with Utility. Perform the reset with Connect.
The software download is free. One purchased key is used only for the final supported counter write.
WIC Reset Utility
Use it before and after the Epson ET-1111 reset to read the values and confirm communication.
Download WIC Reset UtilityWic Reset Connect
Select the detected Epson ET-1111, paste one purchased key and keep the printer connected until the program reports completion.
Download Wic Reset ConnectEpson ET-1111 reset key with help and guarantee
WicReset.info develops and sells Wic Reset Connect. Assistance is available for exact-model checks, USB communication, drivers, service mode, active processes and eligible interrupted attempts.
An activation key cannot repair an unstable cable or unrelated printer fault. The fastest support result comes from correcting the cause before repeating the reset.
Fix the cause of a failed Epson ET-1111 reset
Work through the connection and warning in order. Do not enter another activation key merely because the printer has a separate fault.
The printer is not detected
Use another direct motherboard USB port, clear the print queue, disconnect other printers and test a different data cable.
The program loses the printer
Do not use a hub or Wi-Fi. Close the program, restore stable Windows detection and reopen the current Connect version.
The reset was interrupted
Correct the underlying problem first, then use the official replacement-key page at https://wicreset.online/newkey for an eligible attempt.
A different error remains
The counter reset does not repair cartridge, print-head, scanner, carriage, paper-feed or mechanical faults.
Waste ink is visible
Stop printing and inspect the physical waste ink pad or maintenance absorber. Software changes only the stored value and cannot stop a leak.
Focus on regional suffixes and Windows detection
This Epson ET-1111 page deliberately checks regional suffixes and Windows detection before another activation key is entered.
How to verify the Epson ET-1111 reset
After Wic Reset Connect reports success, switch the printer off for about 10 seconds and start it again. Read the counter in WIC Reset Utility; a cleared or 0% value confirms the electronic reset.
A remaining unrelated error must be diagnosed separately.
Epson ET-1111 reset FAQ
How do I reset the Epson ET-1111 waste ink counter?
Connect Epson ET-1111 directly to Windows by USB, read the counter with WIC Reset Utility, then enter one key in Wic Reset Connect and finish the guided reset.
Is the Epson ET-1111 resetter free to download?
Yes. Wic Reset Connect and WIC Reset Utility are free downloads. A purchased activation key is required for the final protected reset.
Can I reset Epson ET-1111 over Wi-Fi?
No. Use a direct USB data cable for the reset. Wi-Fi can be used again for ordinary printing afterward.
Why must I read the counter before entering the key?
The reading confirms the exact model and stable communication before the protected operation begins.
What if the activation-key field disappears?
The computer lost communication with the printer. Correct the cable, USB port, driver or background-process problem before continuing.
Does one key reset several printers?
No. One key is intended for one completed reset on one supported printer.
Does an unused key expire?
No. An unused activation key has no expiry date before its first use.
Does replacing the waste ink pad or maintenance absorber clear the warning?
Not by itself. Physical maintenance and the stored electronic counter are separate, so the supported counter still needs a software reset.
How do I confirm that the reset worked?
Restart the printer for about 10 seconds and read the counters again in WIC Reset Utility. A cleared or 0% value confirms success.
What if 0% is shown but another error remains?
The waste-counter reset succeeded. Diagnose the remaining cartridge, head, scanner, paper-feed, carriage or mechanical fault separately.
Why should I avoid a USB hub?
A direct motherboard USB port reduces brief disconnects during the protected counter write.
Is support available after purchase?
Yes. Assistance is available for detection, original drivers, USB cables, ports, Epson processes and eligible interrupted attempts.
Use the official model-specific reset workflow
Confirm the exact printer, prepare Windows and USB, use one activation key, restart for about 10 seconds and verify the final result. The unused key does not expire before first use.
English 
Čeština 
Deutsch 
Español 
Français 
Hrvatski 
Magyar 
Italiano 
Nederlands 
Português 
Slovenščina 
Українська