Guide de réinitialisation des erreurs de service des tampons d'encre Epson et Canon pour les codes E11, « Service requis » et 5B00

Epson ET-2550

Epson ET-2550 Maintenance Warning and Counter Reset

For this model, the safest path is simple: USB connection, counter check if needed, WicReset Connect reset and printer restart. This page focuses on Epson E11 Error, Epson E10 Error, Epson E12 Error, Epson E91 Error, Service Required, Maintenance Box Full Epson and Ink Pad Reset Required Epson.

Use WicReset Connect to perform the reset. Use WIC Reset Utility only to read the waste ink counter and check printer communication.

Acheter la clé de réinitialisation Download WicReset Connect Read Waste Counters

Utility is only for checking

Use WIC Reset Utility only to read the waste ink counter and check communication. Use WicReset Connect for the actual reset. This avoids entering a key in the wrong place.

Why this is often faster than service

If the printer is blocked only by the counter, a reset key can restore printing much faster than sending the printer to a service centre. This is useful when you need documents printed today.

Why this matters for this EcoTank printer

This model is often used for home office work, daily documents and low-cost ink tank printing. When it stops with a counter warning, the problem is not only the printer but also lost time. A correct reset can be faster than replacing the printer.

How to reset Epson ET-2550 by USB

  1. Prepare Windows 7–11 and a direct USB cable.
  2. Switch the printer on.
  3. Check the exact model name.
  4. Read waste counters if unsure.
  5. Start WicReset Connect as admin.
  6. Use your reset key.
  7. Wait for completion.
  8. Restart and confirm the warning is gone.

Do not disconnect the printer while the reset is running. If detection fails, fix the USB connection before using the key again.

Messages covered on this page

Epson E10 Error

Service-style warning that should be checked with the counter value.

Epson E11 Error

Common ink pad or waste ink counter warning.

Epson E91 Error

Epson service warning where USB detection and counter reading are useful first checks.

Ink Pad Reset Required Epson

Direct message that usually points to the ink pad or waste ink counter limit.

Maintenance Box Full Epson

May be related to a physical maintenance box or internal counter depending on the model.

Epson E12 Error

Maintenance message often seen when printing is blocked.

Why the exact model matters

Similar Epson names do not always mean the same reset function. Use the supported printer search if you are not sure about the exact printer name shown in Windows.

Model name check

This page is prepared for Epson ET-2550. Common short name: ET-2550. If you are not sure about compatibility, use the supported printer search before buying a key.

USB connection matters

Do not reset through Wi-Fi, network printing or a USB hub. A direct USB cable gives the program stable communication with the printer and avoids many failed reset attempts.

Useful official links

FAQ – Epson ET-2550

Will this fix Maintenance Box Full?

It depends on the exact model. Some printers use a physical maintenance box. Check compatibility and counter values first.

Does this work on Mac?

WicReset Connect is intended for Windows. Use Windows 7, 8, 10 or 11 with USB.

Which program should I download first?

Download WicReset Connect for reset. Download Utility only if you want to read counters first.

What does Service Required mean on Epson ET-2550?

It often means the internal maintenance counter has reached its limit. Reading the waste counter helps confirm the cause.

What if the printer is not detected?

Try another USB port, another cable, install the Epson driver and run WicReset Connect as administrator.

Can this repair a paper jam?

No. Paper jams are separate faults. This guide is for waste ink, ink pad and service counter warnings.

Why the exact model matters

Similar Epson names do not always mean the same reset function. Use the supported printer search if you are not sure about the exact printer name shown in Windows.

USB connection matters

Do not reset through Wi-Fi, network printing or a USB hub. A direct USB cable gives the program stable communication with the printer and avoids many failed reset attempts.

Reset Epson ET-2550 now

If your Epson ET-2550 is blocked by E11, E10, E12, E91, Service Required, Maintenance Box Full or Ink Pad Reset Required, start with USB detection and the official WicReset Connect download.

Acheter la clé de réinitialisation Download WicReset Connect Read Waste Counters

Corriger l'erreur “Le tampon encreur a besoin d'être réparé” - Modèles Epson pris en charge

Ce dont vous avez besoin

  • Touche WicReset Connect (uniquement environ 6 euros - l'option la moins chère)
  • PC Windows
  • Câble USB

Temps nécessaire

Environ 2 minutes

Difficulté

Très facile

Travaux en cas d'erreurs

  • Epson : E10, E11, E12, E91 et erreurs de service similaires
  • Canon : 1700, 5800 et similaires : encre usagée / erreurs de code de support
  • Messages tels que “Compteur d'encre de rebut plein”, “Tampon encreur en fin de vie”.”

Séries d'imprimantes prises en charge

Epson : Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, série L, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF et bien d'autres séries populaires.

Réinitialisation du service de tampon encreur Epson

Si votre Epson affiche des messages tels que “Le tampon encreur a atteint la fin de sa durée de vie.”, “Service de tampon encreur requis” ou “Le tampon encreur est plein”, vous pouvez réinitialiser le service de tampon encreur Epson à l'aide d'une clé WicReset Connect. Le programme réinitialise le compteur interne d'encre usagée, de sorte que l'imprimante fonctionne à nouveau sans avoir à se rendre dans un centre de service.

  • Corrige les avertissements “Epson ink pad service” / “Service required” en quelques minutes.
  • Fonctionne comme un réinitialisation du service de tampon encreur Epson pour la plupart des imprimantes EcoTank, série L, série ET, XP, WF et Stylus.
  • Aucun réinitialisateur matériel n'est nécessaire - il suffit d'un PC Windows, d'un câble USB et de WicReset Connect.

FAQ (court)

Q : Dois-je remplacer le tampon encreur physique ?
R : Dans la plupart des cas, à la maison ou au bureau, il suffit de réinitialiser le compteur d'encre usagée avec WicReset Connect et de continuer à utiliser l'imprimante normalement.

Q : S'agit-il d'une réinitialisation unique ?
R : Chaque touche remet le compteur à zéro une fois. Vous pouvez répéter la procédure à l'avenir avec une autre touche si le message apparaît à nouveau.

Étiquettes: , , , , , , , , , , , , , , , ,