Guia de reinicialização do erro de manutenção do tampão de tinta da Epson e da Canon para os códigos E11, «Service Required» e 5B00

Epson ET-2550

Epson ET-2550 Maintenance Warning and Counter Reset

For this model, the safest path is simple: USB connection, counter check if needed, WicReset Connect reset and printer restart. This page focuses on Epson E11 Error, Epson E10 Error, Epson E12 Error, Epson E91 Error, Service Required, Maintenance Box Full Epson and Ink Pad Reset Required Epson.

Use WicReset Conectar to perform the reset. Use WIC Reset Utility only to read the waste ink counter and check printer communication.

Comprar chave de reinicialização Download WicReset Connect Read Waste Counters

Utility is only for checking

Use WIC Reset Utility only to read the waste ink counter and check communication. Use WicReset Conectar for the actual reset. This avoids entering a key in the wrong place.

Why this is often faster than service

If the printer is blocked only by the counter, a reset key can restore printing much faster than sending the printer to a service centre. This is useful when you need documents printed today.

Why this matters for this EcoTank printer

This model is often used for home office work, daily documents and low-cost ink tank printing. When it stops with a counter warning, the problem is not only the printer but also lost time. A correct reset can be faster than replacing the printer.

How to reset Epson ET-2550 by USB

  1. Prepare Windows 7–11 and a direct USB cable.
  2. Switch the printer on.
  3. Check the exact model name.
  4. Read waste counters if unsure.
  5. Start WicReset Connect as admin.
  6. Use your reset key.
  7. Wait for completion.
  8. Restart and confirm the warning is gone.

Do not disconnect the printer while the reset is running. If detection fails, fix the USB connection before using the key again.

Messages covered on this page

Epson E10 Error

Service-style warning that should be checked with the counter value.

Epson E11 Error

Common ink pad or waste ink counter warning.

Epson E91 Error

Epson service warning where USB detection and counter reading are useful first checks.

Ink Pad Reset Required Epson

Direct message that usually points to the ink pad or waste ink counter limit.

Maintenance Box Full Epson

May be related to a physical maintenance box or internal counter depending on the model.

Epson E12 Error

Maintenance message often seen when printing is blocked.

Why the exact model matters

Similar Epson names do not always mean the same reset function. Use the supported printer search if you are not sure about the exact printer name shown in Windows.

Model name check

This page is prepared for Epson ET-2550. Common short name: ET-2550. If you are not sure about compatibility, use the supported printer search before buying a key.

USB connection matters

Do not reset through Wi-Fi, network printing or a USB hub. A direct USB cable gives the program stable communication with the printer and avoids many failed reset attempts.

Useful official links

FAQ – Epson ET-2550

Will this fix Maintenance Box Full?

It depends on the exact model. Some printers use a physical maintenance box. Check compatibility and counter values first.

Does this work on Mac?

WicReset Connect is intended for Windows. Use Windows 7, 8, 10 or 11 with USB.

Which program should I download first?

Download WicReset Connect for reset. Download Utility only if you want to read counters first.

What does Service Required mean on Epson ET-2550?

It often means the internal maintenance counter has reached its limit. Reading the waste counter helps confirm the cause.

What if the printer is not detected?

Try another USB port, another cable, install the Epson driver and run WicReset Connect as administrator.

Can this repair a paper jam?

No. Paper jams are separate faults. This guide is for waste ink, ink pad and service counter warnings.

Why the exact model matters

Similar Epson names do not always mean the same reset function. Use the supported printer search if you are not sure about the exact printer name shown in Windows.

USB connection matters

Do not reset through Wi-Fi, network printing or a USB hub. A direct USB cable gives the program stable communication with the printer and avoids many failed reset attempts.

Reset Epson ET-2550 now

If your Epson ET-2550 is blocked by E11, E10, E12, E91, Service Required, Maintenance Box Full or Ink Pad Reset Required, start with USB detection and the official WicReset Connect download.

Comprar chave de reinicialização Download WicReset Connect Read Waste Counters

Corrigir o erro “A almofada de tinta precisa de manutenção” - Modelos Epson suportados

O que é necessário

  • Tecla WicReset Connect (apenas cerca de 6 euros - a opção mais económica)
  • PC com Windows
  • Cabo USB

Tempo necessário

Cerca de 2 minutos

Dificuldade

Muito fácil

Funciona para erros

  • Epson: E10, E11, E12, E91 e erros de serviço semelhantes
  • Canon: 1700, 5800 e similares resíduos de tinta / erros de código de suporte
  • Mensagens como “Contador de tinta residual cheio”, “Almofada de tinta no fim da sua vida útil”

Séries de impressoras suportadas

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, série L, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF e muitas outras séries populares.

Reiniciar o serviço de almofadas de tinta Epson

Se a Epson apresentar mensagens como “A almofada de tinta está no fim da sua vida útil”, “Serviço de almofada de tinta necessário” ou “Almofada de tinta residual cheia”, pode reiniciar o serviço de almofada de tinta Epson utilizando uma chave WicReset Connect. O programa reinicia o contador interno de resíduos de tinta, para que a impressora volte a funcionar sem ter de se deslocar a um centro de assistência.

  • Corrige os avisos “Epson ink pad service” / “Service required” em poucos minutos.
  • Funciona como reiniciar o serviço de almofadas de tinta Epson solução para a maioria das impressoras EcoTank, série L, série ET, XP, WF e Stylus.
  • Não é necessário um reiniciador de hardware - apenas um PC com Windows, um cabo USB e o WicReset Connect.

FAQ (curta)

P: É necessário substituir a almofada de tinta física?
R: Na maioria dos casos domésticos e de escritório, basta repor o contador de resíduos de tinta com o WicReset Connect e continuar a utilizar a impressora normalmente.

P: Trata-se de uma reposição única?
R: Cada tecla repõe o contador uma vez. Pode repetir o procedimento no futuro com outra tecla se a mensagem voltar a aparecer.

Tags: , , , , , , , , , , , , , , , ,