Інструкція з скидання помилок обслуговування чорнильних подушок Epson та Canon для кодів E11, «Service Required» та 5B00

Epson ET-2550

Epson ET-2550 Maintenance Warning and Counter Reset

For this model, the safest path is simple: USB connection, counter check if needed, WicReset Connect reset and printer restart. This page focuses on Epson E11 Error, Epson E10 Error, Epson E12 Error, Epson E91 Error, Service Required, Maintenance Box Full Epson and Ink Pad Reset Required Epson.

Use WicReset Connect to perform the reset. Use WIC Reset Utility only to read the waste ink counter and check printer communication.

Купити ключ скидання Download WicReset Connect Read Waste Counters

Utility is only for checking

Use WIC Reset Utility only to read the waste ink counter and check communication. Use WicReset Connect for the actual reset. This avoids entering a key in the wrong place.

Why this is often faster than service

If the printer is blocked only by the counter, a reset key can restore printing much faster than sending the printer to a service centre. This is useful when you need documents printed today.

Why this matters for this EcoTank printer

This model is often used for home office work, daily documents and low-cost ink tank printing. When it stops with a counter warning, the problem is not only the printer but also lost time. A correct reset can be faster than replacing the printer.

How to reset Epson ET-2550 by USB

  1. Prepare Windows 7–11 and a direct USB cable.
  2. Switch the printer on.
  3. Check the exact model name.
  4. Read waste counters if unsure.
  5. Start WicReset Connect as admin.
  6. Use your reset key.
  7. Wait for completion.
  8. Restart and confirm the warning is gone.

Do not disconnect the printer while the reset is running. If detection fails, fix the USB connection before using the key again.

Messages covered on this page

Epson E10 Error

Service-style warning that should be checked with the counter value.

Epson E11 Error

Common ink pad or waste ink counter warning.

Epson E91 Error

Epson service warning where USB detection and counter reading are useful first checks.

Ink Pad Reset Required Epson

Direct message that usually points to the ink pad or waste ink counter limit.

Maintenance Box Full Epson

May be related to a physical maintenance box or internal counter depending on the model.

Epson E12 Error

Maintenance message often seen when printing is blocked.

Why the exact model matters

Similar Epson names do not always mean the same reset function. Use the supported printer search if you are not sure about the exact printer name shown in Windows.

Model name check

This page is prepared for Epson ET-2550. Common short name: ET-2550. If you are not sure about compatibility, use the supported printer search before buying a key.

USB connection matters

Do not reset through Wi-Fi, network printing or a USB hub. A direct USB cable gives the program stable communication with the printer and avoids many failed reset attempts.

Useful official links

FAQ – Epson ET-2550

Will this fix Maintenance Box Full?

It depends on the exact model. Some printers use a physical maintenance box. Check compatibility and counter values first.

Does this work on Mac?

WicReset Connect is intended for Windows. Use Windows 7, 8, 10 or 11 with USB.

Which program should I download first?

Download WicReset Connect for reset. Download Utility only if you want to read counters first.

What does Service Required mean on Epson ET-2550?

It often means the internal maintenance counter has reached its limit. Reading the waste counter helps confirm the cause.

What if the printer is not detected?

Try another USB port, another cable, install the Epson driver and run WicReset Connect as administrator.

Can this repair a paper jam?

No. Paper jams are separate faults. This guide is for waste ink, ink pad and service counter warnings.

Why the exact model matters

Similar Epson names do not always mean the same reset function. Use the supported printer search if you are not sure about the exact printer name shown in Windows.

USB connection matters

Do not reset through Wi-Fi, network printing or a USB hub. A direct USB cable gives the program stable communication with the printer and avoids many failed reset attempts.

Reset Epson ET-2550 now

If your Epson ET-2550 is blocked by E11, E10, E12, E91, Service Required, Maintenance Box Full or Ink Pad Reset Required, start with USB detection and the official WicReset Connect download.

Купити ключ скидання Download WicReset Connect Read Waste Counters

Що вам потрібно

  • Клавіша WicReset Connect (тільки близько 6 євро - найдешевший варіант)
  • ПК з Windows
  • USB-кабель

Необхідний час

Близько 2 хвилин

Складність

Дуже просто

Працює над помилками

  • Епсон: E10, E11, E12, E91 та подібні сервісні помилки
  • Канон: 1700, 5800 і подібні відпрацьовані чорнила / помилки коду підтримки
  • Повідомлення на кшталт “Лічильник відпрацьованого чорнила переповнений”, “Термін служби чорнильної подушечки закінчився”

Підтримувані серії принтерів

Епсон: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-серія, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF і багато інших популярних серій.


Скинути налаштування чорнильниці Epson

Якщо на екрані вашого принтера з'являються такі повідомлення “Термін служби чорнильниці закінчується”, “Потрібна заміна чорнильниці” або “Чорнильниця заповнена”, ти можеш скинути службу чорнильниць Epson за допомогою ключа WicReset Connect. Програма скидає внутрішній лічильник відпрацьованого чорнила, завдяки чому принтер знову працює без відвідування сервісного центру.

  • Виправляє попередження “Потребує обслуговування чорнильниці Epson” / “Потребує обслуговування” за кілька хвилин.
  • Працює як скинути сервіс чорнильниці Epson рішення для більшості принтерів EcoTank, L-серії, ET-серії, XP, WF і Stylus.
  • Апаратний скидач не потрібен - лише ПК з Windows, USB-кабель та WicReset Connect.

Поширені запитання (коротко)

З: Чи потрібно замінювати фізичну чорнильну подушечку?
В: У більшості випадків вдома та в офісі ви просто скидаєте лічильник відпрацьованого чорнила за допомогою WicReset Connect і продовжуєте користуватися принтером у звичайному режимі.

З: Це одноразове перезавантаження?
В: Кожна клавіша обнуляє лічильник один раз. Ви можете повторити процедуру в майбутньому з іншою клавішею, якщо повідомлення з'явиться знову.