Guida al ripristino degli errori di servizio relativi ai tamponi d'inchiostro Epson e Canon per i codici E11, "Service Required" e 5B00

Epson ET-2550

Epson ET-2550 Maintenance Warning and Counter Reset

For this model, the safest path is simple: USB connection, counter check if needed, WicReset Connect reset and printer restart. This page focuses on Epson E11 Error, Epson E10 Error, Epson E12 Error, Epson E91 Error, Service Required, Maintenance Box Full Epson and Ink Pad Reset Required Epson.

Use WicReset Collegare to perform the reset. Use WIC Reset Utility only to read the waste ink counter and check printer communication.

Acquista la chiave di ripristino Download WicReset Connect Read Waste Counters

Utility is only for checking

Use WIC Reset Utility only to read the waste ink counter and check communication. Use WicReset Collegare for the actual reset. This avoids entering a key in the wrong place.

Why this is often faster than service

If the printer is blocked only by the counter, a reset key can restore printing much faster than sending the printer to a service centre. This is useful when you need documents printed today.

Why this matters for this EcoTank printer

This model is often used for home office work, daily documents and low-cost ink tank printing. When it stops with a counter warning, the problem is not only the printer but also lost time. A correct reset can be faster than replacing the printer.

How to reset Epson ET-2550 by USB

  1. Prepare Windows 7–11 and a direct USB cable.
  2. Switch the printer on.
  3. Check the exact model name.
  4. Read waste counters if unsure.
  5. Start WicReset Connect as admin.
  6. Use your reset key.
  7. Wait for completion.
  8. Restart and confirm the warning is gone.

Do not disconnect the printer while the reset is running. If detection fails, fix the USB connection before using the key again.

Messages covered on this page

Epson E10 Error

Service-style warning that should be checked with the counter value.

Epson E11 Error

Common ink pad or waste ink counter warning.

Epson E91 Error

Epson service warning where USB detection and counter reading are useful first checks.

Ink Pad Reset Required Epson

Direct message that usually points to the ink pad or waste ink counter limit.

Maintenance Box Full Epson

May be related to a physical maintenance box or internal counter depending on the model.

Epson E12 Error

Maintenance message often seen when printing is blocked.

Why the exact model matters

Similar Epson names do not always mean the same reset function. Use the supported printer search if you are not sure about the exact printer name shown in Windows.

Model name check

This page is prepared for Epson ET-2550. Common short name: ET-2550. If you are not sure about compatibility, use the supported printer search before buying a key.

USB connection matters

Do not reset through Wi-Fi, network printing or a USB hub. A direct USB cable gives the program stable communication with the printer and avoids many failed reset attempts.

Useful official links

FAQ – Epson ET-2550

Will this fix Maintenance Box Full?

It depends on the exact model. Some printers use a physical maintenance box. Check compatibility and counter values first.

Does this work on Mac?

WicReset Connect is intended for Windows. Use Windows 7, 8, 10 or 11 with USB.

Which program should I download first?

Download WicReset Connect for reset. Download Utility only if you want to read counters first.

What does Service Required mean on Epson ET-2550?

It often means the internal maintenance counter has reached its limit. Reading the waste counter helps confirm the cause.

Cosa succede se la stampante non viene rilevata?

Try another USB port, another cable, install the Epson driver and run WicReset Connect as administrator.

Can this repair a paper jam?

No. Paper jams are separate faults. This guide is for waste ink, ink pad and service counter warnings.

Why the exact model matters

Similar Epson names do not always mean the same reset function. Use the supported printer search if you are not sure about the exact printer name shown in Windows.

USB connection matters

Do not reset through Wi-Fi, network printing or a USB hub. A direct USB cable gives the program stable communication with the printer and avoids many failed reset attempts.

Reset Epson ET-2550 now

If your Epson ET-2550 is blocked by E11, E10, E12, E91, Service Required, Maintenance Box Full or Ink Pad Reset Required, start with USB detection and the official WicReset Connect download.

Acquista la chiave di ripristino Download WicReset Connect Read Waste Counters

Cosa serve

  • Tasto WicReset Connect (solo circa 6 euro - l'opzione più economica)
  • PC Windows
  • Cavo USB

Tempo richiesto

Circa 2 minuti

Difficoltà

Molto facile

Funziona per gli errori

  • Epson: E10, E11, E12, E91 e simili errori di servizio
  • Canon: 1700, 5800 e simili, errori di codice inchiostro di scarto/supporto
  • Messaggi come “Contatore di inchiostro di scarto pieno”, “Tampone d'inchiostro al termine della sua vita utile”.”

Serie di stampanti supportate

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, serie L, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF e molte altre serie popolari.


Ripristino del tampone d'inchiostro Epson

Se il vostro Epson mostra messaggi come “Il tampone d'inchiostro è al termine della sua vita utile”.”, “Necessario servizio di tampone d'inchiostro” o “Cuscinetto d'inchiostro di scarto pieno”, è possibile ripristinare il servizio del tampone d'inchiostro Epson utilizzando una chiave WicReset Connect. Il programma azzera il contatore interno dell'inchiostro di scarto, in modo che la stampante torni a funzionare senza doversi rivolgere a un centro di assistenza.

  • Risolve gli avvisi “Servizio tampone d'inchiostro Epson” / “Servizio richiesto” in pochi minuti.
  • Funziona come un ripristino del tampone d'inchiostro Epson per la maggior parte delle stampanti EcoTank, serie L, serie ET, XP, WF e Stylus.
  • Non è necessario un resetter hardware, ma solo un PC Windows, un cavo USB e WicReset Connect.

FAQ (corto)

D: È necessario sostituire il tampone d'inchiostro fisico?
R: Nella maggior parte dei casi, a casa e in ufficio, è sufficiente azzerare il contatore dell'inchiostro esausto con WicReset Connect e continuare a utilizzare normalmente la stampante.

D: Si tratta di un reset unico?
R: Ogni tasto azzera il contatore una volta. È possibile ripetere la procedura in futuro con un altro tasto se il messaggio appare di nuovo.