Guía para restablecer los errores de servicio de las almohadillas de tinta de Epson y Canon para los códigos E11, «Service Required» y 5B00

Epson ET-2550

Epson ET-2550 Maintenance Warning and Counter Reset

For this model, the safest path is simple: USB connection, counter check if needed, WicReset Connect reset and printer restart. This page focuses on Epson E11 Error, Epson E10 Error, Epson E12 Error, Epson E91 Error, Service Required, Maintenance Box Full Epson and Ink Pad Reset Required Epson.

Use WicReset Conectar to perform the reset. Use WIC Reset Utility only to read the waste ink counter and check printer communication.

Comprar clave de reinicio Download WicReset Connect Read Waste Counters

Utility is only for checking

Use WIC Reset Utility only to read the waste ink counter and check communication. Use WicReset Conectar for the actual reset. This avoids entering a key in the wrong place.

Why this is often faster than service

If the printer is blocked only by the counter, a reset key can restore printing much faster than sending the printer to a service centre. This is useful when you need documents printed today.

Why this matters for this EcoTank printer

This model is often used for home office work, daily documents and low-cost ink tank printing. When it stops with a counter warning, the problem is not only the printer but also lost time. A correct reset can be faster than replacing the printer.

How to reset Epson ET-2550 by USB

  1. Prepare Windows 7–11 and a direct USB cable.
  2. Switch the printer on.
  3. Check the exact model name.
  4. Read waste counters if unsure.
  5. Start WicReset Connect as admin.
  6. Use your reset key.
  7. Wait for completion.
  8. Restart and confirm the warning is gone.

Do not disconnect the printer while the reset is running. If detection fails, fix the USB connection before using the key again.

Messages covered on this page

Epson E10 Error

Service-style warning that should be checked with the counter value.

Epson E11 Error

Common ink pad or waste ink counter warning.

Epson E91 Error

Epson service warning where USB detection and counter reading are useful first checks.

Ink Pad Reset Required Epson

Direct message that usually points to the ink pad or waste ink counter limit.

Maintenance Box Full Epson

May be related to a physical maintenance box or internal counter depending on the model.

Epson E12 Error

Maintenance message often seen when printing is blocked.

Why the exact model matters

Similar Epson names do not always mean the same reset function. Use the supported printer search if you are not sure about the exact printer name shown in Windows.

Model name check

This page is prepared for Epson ET-2550. Common short name: ET-2550. If you are not sure about compatibility, use the supported printer search before buying a key.

USB connection matters

Do not reset through Wi-Fi, network printing or a USB hub. A direct USB cable gives the program stable communication with the printer and avoids many failed reset attempts.

Useful official links

FAQ – Epson ET-2550

Will this fix Maintenance Box Full?

It depends on the exact model. Some printers use a physical maintenance box. Check compatibility and counter values first.

Does this work on Mac?

WicReset Connect is intended for Windows. Use Windows 7, 8, 10 or 11 with USB.

Which program should I download first?

Download WicReset Connect for reset. Download Utility only if you want to read counters first.

What does Service Required mean on Epson ET-2550?

It often means the internal maintenance counter has reached its limit. Reading the waste counter helps confirm the cause.

What if the printer is not detected?

Try another USB port, another cable, install the Epson driver and run WicReset Connect as administrator.

Can this repair a paper jam?

No. Paper jams are separate faults. This guide is for waste ink, ink pad and service counter warnings.

Why the exact model matters

Similar Epson names do not always mean the same reset function. Use the supported printer search if you are not sure about the exact printer name shown in Windows.

USB connection matters

Do not reset through Wi-Fi, network printing or a USB hub. A direct USB cable gives the program stable communication with the printer and avoids many failed reset attempts.

Reset Epson ET-2550 now

If your Epson ET-2550 is blocked by E11, E10, E12, E91, Service Required, Maintenance Box Full or Ink Pad Reset Required, start with USB detection and the official WicReset Connect download.

Comprar clave de reinicio Download WicReset Connect Read Waste Counters

Solucionar el error “La almohadilla de tinta necesita servicio” - Modelos Epson compatibles

Lo que necesita

  • Tecla WicReset Connect (sólo unos 6 euros - la opción más barata)
  • PC con Windows
  • Cable USB

Tiempo necesario

Alrededor de 2 minutos

Dificultad

Muy fácil

Funciona en caso de error

  • Epson: E10, E11, E12, E91 y errores de servicio similares
  • Canon: 1700, 5800 y similares tinta residual / errores de código de soporte
  • Mensajes como “Contador de tinta residual lleno”, “Tampón de tinta al final de su vida útil”

Series de impresoras compatibles

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, serie L, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF y muchas otras series populares.

Restablecer el servicio de almohadillas de tinta Epson

Si tu Epson muestra mensajes como “La almohadilla de tinta está al final de su vida útil”, “Se requiere servicio de almohadilla de tinta” o “Bloc de tinta lleno”, puede restablecer el servicio de almohadillas de tinta Epson mediante una tecla WicReset Connect. El programa restablece el contador interno de tinta residual, por lo que la impresora vuelve a funcionar sin necesidad de acudir a un centro de servicio.

  • Corrige en pocos minutos los avisos “Epson ink pad service” / “Service required”.
  • Funciona como restablecer el servicio de almohadillas de tinta Epson solución para la mayoría de impresoras EcoTank, serie L, serie ET, XP, WF y Stylus.
  • No se necesita un reseteador de hardware: sólo un PC con Windows, un cable USB y WicReset Connect.

FAQ (corto)

P: ¿Es necesario sustituir la almohadilla de tinta física?
R: En la mayoría de los casos domésticos y de oficina, basta con restablecer el contador de tinta residual con WicReset Connect y seguir utilizando la impresora con normalidad.

P: ¿Se trata de un reinicio único?
R: Cada tecla reinicia el contador una vez. Puede repetir el procedimiento en el futuro con otra tecla si el mensaje aparece de nuevo.

Etiquetas: , , , , , , , , , , , , , , , ,