How to Reset Epson L3200 – Fix “Service Required” / Error E11
Quick solution with WicReset Collegare. Works on Windows 7–11 via USB connection.
🔑 Acquistare la chiave WicReset Connect
If your Epson L3200 stops working and shows Errore E11 o “Servizio richiesto”, , significa che il contatore di inchiostro di scarto reached its software limit. Pads are rarely full — the printer is just locked by firmware. You can fix this in a few minutes with WicReset Collegare.
Typical symptoms on Epson L3200
- Printer displays “Servizio richiesto”.
- Error E11 appears and printing is blocked.
- Flashing red lights, no printing possible.
Why does Epson L3200 show this error?
The printer counts waste ink in an internal contatore di inchiostro di scarto. When it hits 100%, the machine locks itself. Resetting the counter with WicReset Collegare clears the error and restores normal use.
How to reset Epson L3200 with WicReset Connect
- Download and install WicReset Collegare.
- Connect the L3200 to your PC with a Cavo USB (Wi-Fi not supported for reset).
- Run the program and enter your purchased WicReset Connect key.
- Cliccare RESET e attendere circa 2 minuti.
- Turn the printer OFF for 10 seconds, then turn it back ON.
👉 Get your reset key here: Buy WicReset Connect key
FAQ – Epson L3200 Reset
Will this remove Error E11?
✅ Yes — resetting the counter clears Error E11 / “Service required”.
Do I need to replace pads?
Usually not. The counter is based on estimates, not actual pad saturation.
Is Wi-Fi reset possible?
❌ No, reset works only via USB.
What systems are supported?
Windows 7, 8, 10, 11 (32 & 64 bit).
Tips to prevent this issue
- Perform fewer unnecessary head cleanings.
- Always use a reliable USB cable during reset.
- Reset when the counter is ~95%, before the printer locks completely.
🔑 Acquistare la chiave WicReset Connect
English 
Čeština 
Deutsch 
Español 
Français 
Hrvatski 
Magyar 
Italiano 
Nederlands 
Português 
Slovenščina 
Українська